Brackets and mounts
Liquid Mixing Device – Multi-Part Exploded Assembly
- Bounding box
- 11230.0 × 300.0 × 202.5 mm
- Engine
- Precision B-rep
- Parameters
- 63
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a portable smart liquid mixing device as a complete mechanical enclosure. The main structure is a rectangular box mounted on a wall. Inside the box, four small liquid storage tanks are installed vertically and fixed to the wall. Each tank has: - A top filling cap/lid for adding liquid. - A bottom outlet port with M16 threaded connection. - A silicone tube connected to each M16 outlet. - Each tank outlet is independent. At the bottom section of the box: - Four peristaltic pumps (or four digital dosing pumps) are installed. - Each pump receives liquid from one silicone tube connected to one storage tank. - The pumps precisely control the amount of each liquid. Inside the main box: - A microcontroller control unit is installed near the pumps. - A power supply module is installed in one corner of the enclosure. - Electrical wiring connects the pumps, controller, display, and sensors. On the front exterior of the box: - Install a digital touchscreen display for user control. Inside the lower part of the device: - Add a mixing chamber/tank. - The mixing tank has four separate inlet ports for receiving liquids from the four dosing pumps. - The tank has one outlet port for the final mixed liquid. - The mixing tank includes a small top filling lid for manually adding water. The system is not connected directly to a water supply; water is poured manually into this tank. At the final outlet: - A silicone hose exits the mixing tank. - The outlet connection uses an M16 threaded fitting. - Install a solenoid valve on the outlet line to control the final liquid flow. Design requirements: - Compact portable medical/industrial device. - Wall-mounted enclosure. - Modern product design. - Transparent mixing chamber to observe liquid mixing. - Easy access for replacing tanks and maintenance. - Realistic manufacturable CAD model. - Show internal arrangement and exploded view. - Include all components as separate parts. - Create a detailed 3D CAD assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between parts | 500 mm | 200 – 2000 |
| Wall plate width | 400 mm | 100 – 1000 |
| Wall plate depth | 300 mm | 100 – 1000 |
| Wall plate thickness | 10 mm | 2 – 50 |
| Mounting hole diameter | 5 mm | 2 – 20 |
| Bracket thickness | 3 mm | 1 – 10 |
| Bracket width | 15 mm | 5 – 50 |
| Bracket height | 15 mm | 5 – 50 |
| Cover width | 400 mm | 100 – 1000 |
| Cover depth | 300 mm | 100 – 1000 |
| Cover thickness | 50 mm | 10 – 200 |
| Screen cutout width | 130 mm | 20 – 500 |
| Screen cutout height | 80 mm | 20 – 500 |
| Vent slot count | 5 | 0 – 20 |
| Vent slot width | 3 mm | 1 – 10 |
| Vent slot length | 30 mm | 5 – 100 |
| Vent slot spacing | 5 mm | 1 – 20 |
| Tank outer diameter | 80 mm | 30 – 200 |
| Tank height | 150 mm | 50 – 300 |
| Tank wall thickness | 5 mm | 1 – 10 |
| Outlet boss OD (M16) | 22 mm | 10 – 30 |
| Outlet bore / barb inner | 6 mm | 2 – 12 |
| Outlet boss height | 15 mm | 5 – 30 |
| Hose barb outer diameter | 8 mm | 4 – 15 |
| Hose barb length | 20 mm | 5 – 40 |
| Cap diameter | 40 mm | 20 – 100 |
| Cap height | 10 mm | 2 – 30 |
| Tube outer diameter | 8 mm | 4 – 15 |
| Tube inner diameter | 6 mm | 2 – 12 |
| Tube length | 100 mm | 20 – 300 |
| Pump body side length | 35 mm | 20 – 50 |
| Pump barb outer diameter | 8 mm | 4 – 15 |
| Pump barb inner diameter | 6 mm | 2 – 12 |
| Pump barb length | 15 mm | 5 – 30 |
| PCB length | 100 mm | 30 – 200 |
| PCB width | 80 mm | 20 – 150 |
| PCB thickness | 2 mm | 1 – 5 |
| Power supply length | 150 mm | 50 – 300 |
| Power supply width | 60 mm | 30 – 100 |
| Power supply height | 40 mm | 20 – 80 |
| Display width | 130 mm | 50 – 300 |
| Display depth | 80 mm | 30 – 200 |
| Display thickness | 20 mm | 5 – 50 |
| Chamber outer diameter | 100 mm | 50 – 200 |
| Chamber height | 150 mm | 50 – 300 |
| Chamber wall thickness | 5 mm | 1 – 10 |
| Inlet barb outer diameter | 8 mm | 4 – 15 |
| Inlet barb inner diameter | 6 mm | 2 – 12 |
| Inlet barb length | 20 mm | 5 – 40 |
| Inlet barb distance from center | 30 mm | 10 – 80 |
| Fill port outer diameter | 20 mm | 8 – 40 |
| Fill port inner diameter | 15 mm | 5 – 30 |
| Fill port height | 15 mm | 5 – 30 |
| Outlet boss OD | 22 mm | 10 – 30 |
| Outlet bore inner diameter | 6 mm | 2 – 12 |
| Outlet boss height | 15 mm | 5 – 30 |
| Outlet hose barb OD | 8 mm | 4 – 15 |
| Outlet hose barb length | 20 mm | 5 – 40 |
| Valve body length | 60 mm | 30 – 100 |
| Valve body width | 40 mm | 20 – 80 |
| Valve body height | 40 mm | 20 – 80 |
| Thread outer diameter | 22 mm | 10 – 30 |
| Thread length | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu