Everything else
Lion-Head Granny Phone Case
- Bounding box
- 99.0 × 126.5 × 25.5 mm
- Engine
- Precision B-rep
- Parameters
- 56
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
make the shape like this reference and also place the granny logo on it as shown in the reference
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 70 mm | 50 – 100 |
| Body Height | 120 mm | 80 – 180 |
| Front Shell Depth | 12 mm | 6 – 20 |
| Rear Shell Depth | 8 mm | 4 – 15 |
| Corner Radius | 20 mm | 1 – 35 |
| Wall Thickness | 2.5 mm | 1 – 5 |
| Ear Diameter | 18 mm | 8 – 30 |
| Ear Offset X | 30 mm | 10 – 45 |
| Ear Offset Y | 45 mm | 20 – 60 |
| Silicone Thickness | 1.5 mm | 0.5 – 3 |
| Speaker Grille Diameter | 30 mm | 15 – 50 |
| Speaker Grille Thickness | 2 mm | 0.5 – 5 |
| Speaker Hole Diameter | 2.5 mm | 1 – 5 |
| Speaker X | 0 mm | -30 – 30 |
| Speaker Y | 30 mm | 0 – 60 |
| Card Slot Width | 40 mm | 20 – 60 |
| Card Slot Height | 5 mm | 2 – 10 |
| Card Slot Y | -30 mm | -60 – 0 |
| Card Guide Depth | 3 mm | 1 – 8 |
| Button Diameter | 8 mm | 3 – 15 |
| Button Height | 3 mm | 1 – 8 |
| Button Count | 3 mm | 1 – 6 |
| Button Spacing | 15 mm | 5 – 30 |
| Button Y | -10 mm | -50 – 10 |
| Charge Cover Width | 12 mm | 5 – 25 |
| Charge Cover Height | 12 mm | 5 – 25 |
| Charge Cover Thickness | 2 mm | 0.5 – 5 |
| Charge X | 0 mm | -30 – 30 |
| Charge Y | -50 mm | -60 – 0 |
| Chassis Width | 60 mm | 40 – 90 |
| Chassis Length | 100 mm | 60 – 160 |
| Chassis Height | 6 mm | 2 – 15 |
| Chassis Wall | 2 mm | 0.5 – 5 |
| Chassis Base Z | -4 mm | -15 – 0 |
| Boss Diameter | 6 mm | 3 – 12 |
| Boss Hole Diameter | 3 mm | 1 – 6 |
| Boss X | 25 mm | 10 – 40 |
| Boss Y | 45 mm | 20 – 70 |
| Screw Diameter | 2.5 mm | 1 – 5 |
| Screw Length | 8 mm | 3 – 20 |
| Screw Head Diameter | 5 mm | 2 – 10 |
| Screw Head Height | 2 mm | 0.5 – 5 |
| Mane Lobe Count | 5 mm | 2 – 10 |
| Mane Lobe Diameter | 18 mm | 6 – 30 |
| Mane Lobe Overlap | 4 mm | 0 – 10 |
| Logo X | 0 mm | -30 – 30 |
| Logo Y | -55 mm | -60 – 0 |
| Logo Face Diameter | 20 mm | 10 – 40 |
| Logo Depth | 1.5 mm | 0.5 – 4 |
| Logo Eye Diameter | 3 mm | 1.5 – 6 |
| Logo Eye Spacing | 8 mm | 4 – 15 |
| Logo Eye Y | 2 mm | 0 – 6 |
| Logo Mouth Width | 6 mm | 3 – 12 |
| Logo Mouth Height | 2 mm | 1 – 5 |
| Logo Bun Diameter | 7 mm | 4 – 15 |
| Logo Bun Offset | -6 mm | -12 – -2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm