Everything else
Linux Console with Front Fan and Air Duct
- Bounding box
- 282.0 × 200.0 × 310.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
a lot better but i want something that can fith the bc250 mother board a fan in the front with a air duct directing in the heatsink of the motherboard try and fint the dimentions and data from the internet just do a good job
Parameters
| Name | Value | Range |
|---|---|---|
| Case Width | 200 mm | 150 – 300 |
| Case Height | 200 mm | 150 – 300 |
| Case Depth | 250 mm | 200 – 400 |
| Wall Thickness | 3 mm | 2 – 6 |
| Motherboard Width | 170 mm | 100 – 250 |
| Motherboard Depth | 170 mm | 100 – 250 |
| Motherboard Offset X | 0 mm | -50 – 50 |
| Motherboard Offset Y | 0 mm | -50 – 50 |
| Motherboard Offset Z | 20 mm | 0 – 50 |
| CPU Heatsink X | 0 mm | -50 – 50 |
| CPU Heatsink Y | 0 mm | -50 – 50 |
| CPU Heatsink Z | 30 mm | 0 – 80 |
| CPU Heatsink Size | 60 mm | 30 – 100 |
| Fan Size | 80 mm | 60 – 120 |
| Fan Thickness | 25 mm | 15 – 40 |
| Fan Offset X | 0 mm | -50 – 50 |
| Fan Offset Y | 0 mm | -50 – 50 |
| Fan Offset Z | 30 mm | 0 – 80 |
| Duct Length | 80 mm | 30 – 150 |
| Duct Wall Thickness | 2 mm | 1 – 5 |
| Duct Outlet Width | 60 mm | 30 – 100 |
| Duct Outlet Height | 60 mm | 30 – 100 |
| Duct Offset X | 0 mm | -50 – 50 |
| Duct Offset Y | 0 mm | -50 – 50 |
| Duct Offset Z | 30 mm | 0 – 80 |
| Front Grill Slot Width | 5 mm | 2 – 10 |
| Front Grill Slot Spacing | 8 mm | 4 – 15 |
| Front Grill Slot Count | 5 | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like