Everything else
Lightweight Inshore Inspection USV
- Bounding box
- 1240 × 520 × 420 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
轻量化近海巡检无人艇，单体浅吃水船体，长1200mm 宽520mm 高260mm，吃水90mm；甲板中央凸起设备舱 220×300×160mm，前部摄像头云台圆柱Φ80×70mm，尾部左右双推进器罩Φ110×120mm，船底开4个Φ25减重孔，整体圆角倒角，毫米单位，输出STEP
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 1200 mm | 600 – 2000 |
| Overall beam | 520 mm | 300 – 1000 |
| Overall hull height | 260 mm | 150 – 600 |
| Design draft | 90 mm | 40 – 300 |
| Hull shell thickness | 8 mm | 4 – 20 |
| Bottom lightening hole diameter | 25 mm | 10 – 50 |
| Cabin length along hull X | 220 mm | 100 – 400 |
| Cabin width across beam | 300 mm | 100 – 500 |
| Cabin height | 160 mm | 80 – 400 |
| Gimbal diameter | 80 mm | 30 – 150 |
| Gimbal height | 70 mm | 20 – 150 |
| Shroud diameter | 110 mm | 50 – 200 |
| Shroud length | 120 mm | 50 – 250 |
| Shroud lateral offset from centerline | 170 mm | 100 – 240 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm