Everything else
Lightweight hex basket 150x70
- Bounding box
- 150 × 70 × 50.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
сделай мне корзинку 15 см в длину 7 см в шрину для пчати на бамбу лаб а 1 нужгно легкую быструю и простую с какиминибудь облегченными стенками чтобы тратить меньше филамента
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length at top | 150 mm | 60 – 300 |
| Outer width at top | 70 mm | 30 – 200 |
| Height | 50 mm | 20 – 150 |
| Wall thickness | 1.6 mm | 1.2 – 4 |
| Floor thickness | 1.6 mm | 1.2 – 6 |
| Solid rim height at top | 6 mm | 2 – 20 |
| Inward taper per side at the bottom | 4 mm | 0 – 10 |
| Corner radius at top | 12 mm | 4 – 30 |
| Chamfer on the bottom edge | 1 mm | 0 – 2 |
| Hex hole size (circumradius) | 8 mm | 3 – 14 |
| Hole pitch along the walls | 19 mm | 10 – 40 |
| Rows of holes | 2 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm