Brackets and mounts
Left Laptop Bridge Bracket
- Bounding box
- 49.2 × 31.8 × 14.1 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable left-side laptop bridge bracket with the following specific geometric bounds and operations: 1. MAIN BODY: Create a solid right-angle triangular wedge block with a length (front-to-back) of 6.25 inches, a width (side-to-side thickness) of 1.25 inches, and a maximum back height of 1.75 inches. The top face must slope downward from the back height of 1.75 inches to a front height of 0.25 inches to create a forward-sloping writing ramp. 2. BOTTOM TUNNEL CUTOUT (Laptop Clearance): Cut a flat rectangular channel completely through the bottom underside of the wedge from the front face all the way to the back face. The cutout dimensions must be exactly 1.18 inches high and 1.5 inches wide, creating an open-ended archway underneath the entire length of the bracket. 3. TOP RECESSED TRACK (Glass Slot): Cut a thin, uniform rectangular slot directly into the sloped top face of the wedge, running continuously from the front edge to the back edge. The slot must be exactly 4.2mm (0.165 inches) wide and 6mm (0.236 inches) deep. The floor of the slot must maintain the same downward slope angle as the main wedge. Position the slot along the inner vertical face of the bracket. Ensure the final 3D model is a single manifold mesh with clean intersecting boolean operations.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (front-to-back) | 158.75 mm | 100 – 250 |
| Width (side-to-side) | 31.75 mm | 15 – 60 |
| Back Height | 44.45 mm | 20 – 80 |
| Front Height | 6.35 mm | 1 – 20 |
| Tunnel Height | 29.97 mm | 5 – 60 |
| Tunnel Width | 38.1 mm | 10 – 70 |
| Glass Slot Width | 4.2 mm | 1 – 12 |
| Glass Slot Depth | 6 mm | 1 – 15 |
| Slot Offset from Inner Face | 5 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu