Everything else
LED Wax Candle
- Bounding box
- 25.9 × 26.9 × 162.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Construct a canld,e 150mm height, 25mm diameter with a 20mm wide, 10mm deep hole, where a thin led board can be inserted. It should have runnign wax on the side and a small flame up top
Parameters
| Name | Value | Range |
|---|---|---|
| Candle body diameter | 25 mm | 15 – 60 |
| Candle body height | 150 mm | 60 – 250 |
| Chamfer on top and bottom rim | 1.2 mm | 0 – 3 |
| Slot opening width | 20 mm | 8 – 40 |
| Slot depth measured from the surface | 10 mm | 3 – 20 |
| Slot centre height | 135 mm | 20 – 240 |
| LED board thickness | 3 mm | 1 – 8 |
| Slide fit clearance per side | 0.3 mm | 0.1 – 0.6 |
| Number of running wax drips | 11 mm | 3 – 24 |
| Longest drip length | 55 mm | 8 – 120 |
| Flame height above the candle | 12 mm | 6 – 25 |
| Widest part of the flame | 8.4 mm | 4 – 16 |
| Depth of the flame mounting recess | 4 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm