Brackets and mounts
LED Pod Housing
- Bounding box
- 85.0 × 66.0 × 48.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
1. HOUSING 3D-printable LED pod housing. Rounded square [W] x [H] mm, corner radius [R] mm, depth [D] mm, 3 mm walls, open front and rear. Four M3 heat-set insert bosses (5 mm OD, 4 mm deep) on the front face at [positions]. Internal 2 mm ledge for the optic plate. One boss on the bottom with a 12.5 mm hole (PG7 cable gland) and one 12 mm boss on the side for a vent plug. Two M5 bosses on the rear sides at [spacing] for the mount bracket. Fully parametric, export STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 80 mm | 40 – 200 |
| Outer Height | 60 mm | 40 – 200 |
| Depth | 40 mm | 15 – 150 |
| Corner Radius | 8 mm | 1 – 30 |
| Wall Thickness | 3 mm | 1.5 – 8 |
| M3 Boss OD | 5 mm | 3.5 – 14 |
| M3 Boss Length | 6 mm | 3 – 20 |
| M3 Insert Hole Dia | 3.4 mm | 2.5 – 6 |
| M3 Insert Depth | 4 mm | 2 – 14 |
| Ledge Width | 2 mm | 1 – 10 |
| Ledge Thickness | 2 mm | 1 – 8 |
| Ledge Setback from Front | 12 mm | 3 – 60 |
| Gland Boss OD | 20 mm | 14 – 45 |
| PG7 Hole Dia | 12.5 mm | 6 – 25 |
| Gland Boss Height | 6 mm | 2 – 20 |
| Vent Boss OD | 12 mm | 6 – 30 |
| Vent Hole Dia | 5 mm | 2 – 14 |
| Vent Boss Height | 5 mm | 2 – 20 |
| Vent Boss Position | 26 mm | 5 – 140 |
| M5 Boss OD | 10 mm | 6 – 22 |
| M5 Boss Height | 8 mm | 3 – 25 |
| M5 Tap Drill Dia | 4.2 mm | 2.5 – 10 |
| M5 Hole Depth | 6 mm | 2 – 20 |
| M5 Boss Spacing | 60 mm | 15 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu