Brackets and mounts
LCD Module Enclosure (Front Housing + Rear Cover)
- Bounding box
- 111.0 × 73.0 × 14.3 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
MAIN MODULE DIMENSIONS: - PCB width: 106.00 mm - PCB height: 68.00 mm - LCD/module overall width: 106.10 mm - LCD/module overall height: 67.80 mm - overall module thickness: approximately 8.80 mm DISPLAY AREA: - visible LCD width: 95.54 mm - visible LCD height: 54.36 mm - create front display opening: 97.00 mm x 56.00 mm - center the display opening horizontally - position it so the lower bezel remains larger than the upper bezel, matching the original module - front bezel around screen: minimum 3 mm ENCLOSURE STYLE: - modern rounded rectangular enclosure - outer corner radius: 6 mm - front edge radius: 2 mm - smooth front bezel - slightly curved or chamfered rear edges - compact design with minimal unused space WALL THICKNESS: - side walls: 2.0 mm - front bezel: 2.0 to 2.5 mm - rear cover: 2.0 mm INTERNAL CLEARANCE: - PCB clearance: 0.5 mm around all sides - internal cavity minimum dimensions: 107.0 mm x 69.0 mm - provide at least 1.0 mm additional clearance behind the tallest PCB components PCB MOUNTING: - use four internal mounting posts - mounting holes in PCB are 4.0 mm diameter - hole centers are approximately: - X = 4 mm and 102 mm - Y = 4 mm and 64 mm - mounting post outer diameter: 7 to 8 mm - use M3 screw holes - screw hole diameter for self-tapping M3: 2.6 to 2.8 mm - alternatively use 3.2 mm clearance holes for standard M3 screws - post height should position the LCD correctly behind the front bezel FRONT LCD RETENTION: - create an internal ledge around the display - ledge should prevent the LCD module from moving toward the front - allow approximately 0.3 mm clearance around the module - do not apply pressure directly to the LCD glass LEFT SIDE PORTS: - provide openings for both USB-C connectors - one USB-C port marked UART - one USB-C port marked USB - each opening approximately 12 mm wide x 7 mm high - add at least 1 mm clearance around each connector - make the openings slightly rounded
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 111 mm | 60 – 250 |
| Body Height | 73 mm | 40 – 200 |
| Housing Depth | 12.3 mm | 6 – 40 |
| Side Wall Thickness | 2 mm | 1 – 5 |
| Front Bezel Face Thickness | 2.5 mm | 1 – 6 |
| Outer Corner Radius | 6 mm | 1 – 15 |
| Front Edge Radius | 2 mm | 0.2 – 4 |
| Cavity Corner Radius | 4 mm | 0.5 – 10 |
| Display Opening Width | 97 mm | 20 – 200 |
| Display Opening Height | 56 mm | 20 – 150 |
| Display Opening Corner Radius | 2 mm | 0 – 10 |
| Lower Bezel Height | 10 mm | 2 – 30 |
| LCD Retention Ledge Width | 2.5 mm | 0.5 – 6 |
| LCD Retention Ledge Thickness | 1 mm | 0.3 – 3 |
| Mounting Post Diameter | 7.5 mm | 3 – 12 |
| Post Offset X (from centre) | 49 mm | 10 – 60 |
| Post Offset Y (from centre) | 30 mm | 5 – 40 |
| M3 Pilot Hole Diameter | 2.7 mm | 1 – 5 |
| M3 Pilot Hole Depth | 6 mm | 1 – 12 |
| Side Port Opening Width | 12 mm | 4 – 25 |
| Side Port Opening Height | 7 mm | 3 – 15 |
| Side Port Corner Radius | 1 mm | 0 – 3 |
| Port Centre Spacing (UART / USB) | 30 mm | 10 – 60 |
| Side Port Centre Height | 6 mm | 1 – 11 |
| Rear Cover Thickness | 2 mm | 1 – 6 |
| Rear Cover Edge Chamfer | 0.6 mm | 0.2 – 1 |
| Rear Cover M3 Clearance Hole | 3.4 mm | 1.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu