Ladder-Rod Climbing Mechanical Leg

1 views

Bounding box: 30 × 26 × 210 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: October 29, 2026

Download

Free to download and use. See the terms.

The prompt

Mechanical leg(simplified) being able to climb ladder rods(rods that are perpendicular to the leg's height). The leg has to extendable and retractable, contain a maximum of 2 joints

Parameters

Name	Value	Range
Overall assembled height to top of hip eye	210 mm	150 – 350
Outer sleeve length	110 mm	60 – 200
Telescoping rod overlap inside sleeve	42 mm	15 – 80
Outer sleeve diameter	26 mm	16 – 60
Sleeve wall thickness	3.5 mm	2 – 8
Sliding clearance per side	0.3 mm	0.1 – 0.8
Hip eye outer diameter	30 mm	20 – 60
Hip eye width	20 mm	10 – 40
Neck diameter under eye	24 mm	12 – 40
M5 pin clearance hole	5.2 mm	3 – 10
Gripper width along rung	30 mm	20 – 60
Gripper depth across rung	24 mm	16 – 50
Gripper block height	26 mm	14 – 50
Ladder rung diameter to straddle	18 mm	8 – 30
Depth of self-supporting V saddle	12 mm	6 – 20
Inner rod embedment into gripper	8 mm	4 – 15

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS