Laboratory Fermenter with Impeller and Probes

1 views

Bounding box: 92 × 92 × 136 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

I need you to design a fermenter in 3D, where it can be seen that it has an impeller and outlets to check the pH and temperature

Parameters

Name	Value	Range
Vessel outer diameter	80 mm	40 – 200
Vessel body height	105 mm	50 – 300
Vessel wall thickness	3 mm	1.2 – 8
Top flange diameter	92 mm	45 – 220
Top flange thickness	8 mm	3 – 20
Headplate thickness	6 mm	3 – 20
Probe port offset from axis	28 mm	10 – 60
Motor housing diameter	30 mm	10 – 80
Motor housing height	26 mm	8 – 80
Stirrer shaft diameter	6 mm	3 – 16
Impeller diameter	50 mm	10 – 180
Impeller height above vessel floor	22 mm	6 – 100
pH probe body diameter	11 mm	4 – 25
Temperature probe diameter	6 mm	3 – 20
Probe insertion depth below headplate	60 mm	10 – 200

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS