Brackets and mounts
L-Shaped Shelf Support Bracket with Triangular Brace
- Bounding box
- 5.3 × 6.3 × 0.1 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
The brace extends from where the 2 mounts meet and does not connect them in the triangular pattern or provide any additional support. Change this so that the brace goes from the midpoint of the wall mount to the midpoint of the shelf mount to form a triangle. There are also no fillets or rounded corners on any part of the model, so add them to the corners of the mounts.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Mount Length | 5 in | 1 – 12 |
| Shelf Mount Length | 6 in | 1 – 12 |
| Width | 0.5 in | 0.25 – 2 |
| Thickness | 0.13 in | 0.05 – 0.5 |
| Hole Diameter | 0.2 in | 0.1 – 0.5 |
| Hole Count per Mount | 3 | 1 – 6 |
| Fillet Radius | 0.13 in | 0.05 – 0.25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent