Brackets and mounts
L-Shaped Shelf Support Bracket with Triangular Brace
- Bounding box
- 133.4 × 158.8 × 3.2 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a model of an L-shaped shelf support bracket. It should have a brace going between both of the wall mount and shelf mount sides to form a triangular brace to handle the load that would be placed onto it. The wall mount, shelf mount, and brace must all be 1/8 of an inch thick, and 1/2 an inch wide. The brace should be mounted vertically from the middle of the mounts and extend from the midpoints of each. The wall mount must be 5 inches long, while the shelf mount must be 6 inches long. There should be 3 screw holes in each of the mounts that are equal distances apart. The diameter of these holes should be 0.2 inches. Make sure to fillet the corners of both the mounts, and also fillet the area where they connect.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Mount Length | 127 mm | 50 – 200 |
| Shelf Mount Length | 152.4 mm | 50 – 250 |
| Width | 12.7 mm | 5 – 50 |
| Thickness | 3.18 mm | 1 – 10 |
| Screw Hole Diameter | 5.08 mm | 2 – 10 |
| Holes per Mount | 3 | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent