3D preview of L-Bracket with Gusset, Top V-Notch & Bottom Channel
Loading the interactive model…
Interactive 3D model of L-Bracket with Gusset, Top V-Notch & Bottom Channel

Everything else

L-Bracket with Gusset, Top V-Notch & Bottom Channel

1 views
Bounding box
75.0 × 36.0 × 45.0 mm
Engine
Precision B-rep
Parameters
14
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Modify this model by adding three cutouts: 1. Cut a symmetrical V-shaped groove along the top face of the tall vertical block (24 mm wide at the top, 5 mm deep in the center). 2. Drill a circular through-hole with a diameter of 10 mm horizontally through the tall vertical block, centered horizontally and positioned halfway between the base top and the V-groove bottom. 3. Cut a semicircular cylindrical channel with a radius of 10 mm along the entire 75 mm length of the bottom face, centered along the width.

Parameters

NameValueRange
Base Length (X)75 mm40 – 160
Base Width (Y)36 mm20 – 90
Base Height (Z)20 mm5 – 60
Bottom Channel Radius10 mm1 – 20
Wall Start X57 mm10 – 150
Wall Length (X)18 mm3 – 80
Wall Total Height (Z)45 mm12 – 130
V-Notch Top Width24 mm2 – 80
V-Notch Depth5 mm0.5 – 30
Wall Hole Diameter10 mm1 – 30
Wall Hole Center Z30 mm1 – 44
Rib Thickness8 mm2 – 30
Rib Base Start X18 mm0 – 75
Rib Height on Wall (Z)36 mm5 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

L-Bracket with Gusset, Top V-Notch & Bottom Channel - Free CAD Model (STEP, STL) | TextoCAD