Brackets and mounts
L-bracket with camera and servo mount
- Bounding box
- 45.0 × 32.5 × 27.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
"Create an L-shaped mechanical bracket with a uniform 2mm wall thickness. The bottom flange is 30mm long and 15mm wide, featuring two 1.5mm pilot holes spaced exactly 10mm apart along the centerline for attaching an SG90 servo horn. The vertical face is 25mm tall and 25mm wide. In the exact center of the vertical face, cut a 10mm circular through-hole for a camera lens. Surround this central hole with four 2.2mm through-holes spaced in a rectangle that is 21mm wide and 12.5mm tall to mount a Raspberry Pi Camera Module V2. Apply a 1mm fillet to all sharp outer corners to save weight."
Parameters
| Name | Value | Range |
|---|---|---|
| Bottom Flange Length | 30 mm | 10 – 100 |
| Bottom Flange Width | 15 mm | 5 – 50 |
| Wall Thickness | 2 mm | 1 – 10 |
| Vertical Face Height | 25 mm | 10 – 100 |
| Vertical Face Width | 25 mm | 10 – 100 |
| Pilot Hole Diameter | 1.5 mm | 1 – 5 |
| Pilot Hole Spacing | 10 mm | 5 – 50 |
| Camera Hole Diameter | 10 mm | 2 – 30 |
| Mount Hole Diameter | 2.2 mm | 1 – 10 |
| Mount Rectangle Width | 21 mm | 5 – 50 |
| Mount Rectangle Height | 12.5 mm | 5 – 50 |
| Fillet Radius (outer edges) | 1 mm | 0.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent