Brackets and mounts
L-Bracket for MG996R Servo
- Bounding box
- 60.0 × 40.0 × 54.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
An L-shaped bracket for MG996R servo. Base plate: 60mm long, 40mm wide, 4mm thick. Four 3.2mm diameter mounting holes at the corners, 10mm inset from each edge. Vertical plate rises from one long edge of the base, at 90 degrees. Vertical plate: 60mm long, 50mm tall, 4mm thick. In the vertical plate: a rectangular cutout window, centered, 20mm wide × 40mm tall. Around the window: four M3 screw holes, matching MG996R mounting pattern: - Top-left: 10mm right of plate left edge, 5mm above window top - Top-right: 10mm left of plate right edge, 5mm above window top - Bottom-left: 10mm right of plate left edge, 5mm below window bottom - Bottom-right: 10mm left of plate right edge, 5mm below window bottom A triangular gusset reinforces the inside 90-degree corner: - 20mm wide, runs full length of the bracket center. All sharp edges: 0.8mm fillet. Material: PLA.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 60 mm | 30 – 120 |
| Base width | 40 mm | 20 – 80 |
| Base thickness | 4 mm | 2 – 8 |
| Vertical plate length | 60 mm | 30 – 120 |
| Vertical plate height | 50 mm | 30 – 100 |
| Vertical plate thickness | 4 mm | 2 – 8 |
| Window width | 20 mm | 10 – 50 |
| Window height | 40 mm | 20 – 80 |
| Screw hole diameter (M3 clearance) | 3.2 mm | 2.5 – 5 |
| Hole inset from edges | 10 mm | 5 – 20 |
| Vertical hole offset from window | 5 mm | 2 – 15 |
| Gusset width (leg length) | 20 mm | 10 – 50 |
| Fillet radius | 0.8 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu