Everything else
Knurled M18 Gas Nozzle Adapter
- Bounding box
- 30.0 × 30.0 × 53.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
总高 53 mm，主体外径 Ø30 mm，轴向直纹滚花。 顶部 M18×1.5 外螺纹，长度 12 mm。 O 形圈槽底径 Ø16.2 mm，槽宽 2 mm。 底部 5/8-18 UNF-2B 内螺纹，有效螺纹深度 22 mm。 气路必须从底部贯通至顶部，不得建成盲孔。 暂定结构： 顶部凸缘外径 Ø21.5 mm、厚度 2.5 mm，均为估算值。 滚花节距 0.8 mm、齿深 0.2 mm，均为暂定值。 以中心轴线为 Z 轴，底面 Z=0，顶面 Z=53；合理安排肩部、密封槽和过渡结构，避免总高超差。
Parameters
| Name | Value | Range |
|---|---|---|
| Total Height | 53 mm | 40 – 80 |
| Knurled Body OD | 30 mm | 20 – 60 |
| Top Thread Major Dia | 18 mm | 6 – 30 |
| Top Thread Pitch | 1.5 mm | 0.5 – 3 |
| Top Thread Length | 12 mm | 3 – 25 |
| Top Flange OD | 21.5 mm | 10 – 40 |
| Top Flange Thickness | 2.5 mm | 1 – 8 |
| O-Ring Groove Bottom Dia | 16.2 mm | 5 – 30 |
| O-Ring Groove Width | 2 mm | 1 – 6 |
| Bottom Thread Major Dia | 15.88 mm | 5 – 30 |
| Bottom Thread Pitch | 1.41 mm | 0.5 – 3 |
| Bottom Thread Effective Depth | 22 mm | 5 – 35 |
| Through Air Passage Dia | 6 mm | 1 – 12 |
| Knurl Pitch | 0.8 mm | 0.2 – 2 |
| Knurl Depth | 0.2 mm | 0.05 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm