Gears and transmission
Kayak Rod Holder Assembly
- Bounding box
- 40.0 × 134.7 × 193.2 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Important: * DO NOT model or include the kayak rail or track. * DO NOT create the rail as part of the model. * Only create the rod holder assembly and the sliding track adapter that inserts into an existing YakAttack GearTrac/GT90-style rail. * The sliding adapter should be a separate removable part, not attached to the rail. Split the model into separate printable parts: 1. Main rod holder body 2. Rear locking cup 3. Rotating pivot joint 4. Pivot locking wheel/knob 5. Sliding track adapter 6. Locking T-bolt or track foot 7. Any spacers or bushings All parts must be separate solids ready for individual STL export. Design the parts to assemble using M5 or M6 stainless steel bolts, washers, and lock nuts. The track adapter must slide into an existing YakAttack GearTrac/GT90-style rail and lock securely with a thumb knob. Do not include or model the rail itself. Optimize every part for FDM printing in PETG or ASA with minimal supports. Export each component as its own STL plus a complete assembly STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube Length | 200 mm | 100 – 300 |
| Tube Outer Diameter | 40 mm | 20 – 60 |
| Tube Inner Diameter | 30 mm | 15 – 50 |
| Reel Slot Length | 50 mm | 20 – 100 |
| Reel Slot Width | 10 mm | 5 – 20 |
| Reel Slot Depth | 10 mm | 5 – 15 |
| Rear Cup Outer Diameter | 50 mm | 30 – 70 |
| Rear Cup Depth | 30 mm | 15 – 50 |
| Pivot Joint Diameter | 30 mm | 20 – 50 |
| Pivot Joint Thickness | 20 mm | 10 – 30 |
| Pivot Hole Diameter | 6.5 mm | 5 – 10 |
| Locking Knob Diameter | 30 mm | 20 – 50 |
| Locking Knob Height | 20 mm | 10 – 30 |
| Adapter Length | 80 mm | 50 – 120 |
| Adapter Width | 25 mm | 15 – 40 |
| Adapter Thickness | 15 mm | 10 – 25 |
| T-Slot Stem Width | 10 mm | 6 – 15 |
| T-Slot Stem Height | 6 mm | 3 – 10 |
| T-Slot Head Width | 16 mm | 10 – 22 |
| T-Slot Head Height | 4 mm | 2 – 8 |
| T-Bolt Head Width | 16 mm | 10 – 22 |
| T-Bolt Head Length | 20 mm | 15 – 30 |
| T-Bolt Head Thickness | 4 mm | 2 – 8 |
| T-Bolt Stem Diameter | 6 mm | 4 – 10 |
| T-Bolt Stem Length | 20 mm | 15 – 35 |
| Spacer Outer Diameter | 10 mm | 6 – 20 |
| Spacer Thickness | 5 mm | 2 – 10 |
| Rod Tube Angle | 30 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a