Everything else
JST XH 5-pin Cable Matching Pair
- Bounding box
- 17.7 × 17.4 × 8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
i need a 2.5mm Pitch 5-pin Cable Matching Pair - JST XH compatible from adafruit
Parameters
| Name | Value | Range |
|---|---|---|
| Pin count | 5 mm | 2 – 8 |
| Pin pitch | 2.5 mm | 1.5 – 5 |
| Pin diameter | 1.4 mm | 1 – 2.5 |
| Pin length from body face | 6.5 mm | 3 – 14 |
| Mating nose width | 13.4 mm | 8 – 30 |
| Mating nose height | 2.6 mm | 1.5 – 8 |
| Mating nose length | 2.6 mm | 1 – 8 |
| Body width | 17 mm | 10 – 40 |
| Body height | 8 mm | 4 – 20 |
| Body length | 8.6 mm | 4 – 25 |
| Sliding fit clearance per side | 0.2 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm