Brackets and mounts
Jon Boat Aluminum Interior Skeletal Frame Assembly
- Bounding box
- 3658.0 × 914.0 × 312.1 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
A structural aluminum skeletal frame assembly for a 3658 mm long by 914 mm wide Jon boat hull interior. Made from 38.1 mm x 38.1 mm x 3.175 mm angle stock and 25.4 mm x 25.4 mm x 3.175 mm square tubing. The frame consists of: 1) A 914 mm long raised front casting deck frame elevated 305 mm high with three longitudinal support stringers. 2) A 1219 mm long by 254 mm wide by 305 mm high side gun box skeleton frame attached along the starboard wall. 3) Four parallel 25.4 mm floor stringers running longitudinally across five transverse floor ribs. 4) Two 45-degree stern transom knee braces made from 38.1 mm square tube with 4.76 mm triangular gusset plates. 5) A 343 mm x 190 mm x 50.8 mm battery tray frame on the port stern corner. 6) A 520 mm x 343 mm x 76 mm fuel tank cage raised 25.4 mm off the floor on the starboard stern corner with a vertical aluminum divider plate. 7) A 152 mm x 203 mm x 3.175 mm flat bilge pump mounting plate centered over the keel 50.8 mm forward of the transom and elevated 12.7 mm off the bottom hull.
Parameters
| Name | Value | Range |
|---|---|---|
| Hull Interior Length | 3658 mm | 2000 – 6000 |
| Hull Interior Width | 914 mm | 600 – 2000 |
| Angle Stock Leg | 38.1 mm | 12 – 80 |
| Angle Stock Thickness | 3.18 mm | 1 – 10 |
| Square Tube Size | 25.4 mm | 10 – 60 |
| Square Tube Wall | 3.18 mm | 1 – 8 |
| Deck Frame Bow Offset | 0 mm | 0 – 1000 |
| Deck Frame Length | 914 mm | 400 – 1800 |
| Deck Frame Width | 914 mm | 400 – 2000 |
| Deck Frame Height | 305 mm | 100 – 700 |
| Deck Support Stringers | 3 ea | 1 – 8 |
| Gun Box Start From Bow | 1830 mm | 0 – 3658 |
| Gun Box Length | 1219 mm | 300 – 2500 |
| Gun Box Width | 254 mm | 100 – 600 |
| Gun Box Height | 305 mm | 100 – 700 |
| Floor Stringer Count | 4 ea | 2 – 8 |
| Stringer Length | 3000 mm | 500 – 4000 |
| Stringer Start From Bow | 350 mm | 0 – 1500 |
| Transverse Rib Count | 5 ea | 2 – 10 |
| Rib Width | 914 mm | 300 – 2000 |
| First Rib From Bow | 500 mm | 0 – 2000 |
| Rib Pitch | 600 mm | 150 – 1500 |
| Knee Brace Length | 300 mm | 100 – 700 |
| Knee Brace Angle | 45 deg | 20 – 70 |
| Gusset Leg Length | 100 mm | 30 – 250 |
| Gusset Thickness | 4.76 mm | 1.5 – 12 |
| Battery Tray Length | 343 mm | 150 – 700 |
| Battery Tray Width | 190 mm | 100 – 500 |
| Battery Tray Height | 50.8 mm | 20 – 200 |
| Fuel Cage Length | 520 mm | 200 – 1200 |
| Fuel Cage Width | 343 mm | 150 – 900 |
| Fuel Cage Height | 76 mm | 30 – 300 |
| Fuel Cage Floor Lift | 25.4 mm | 0 – 150 |
| Divider Plate Length | 343 mm | 100 – 900 |
| Divider Plate Height | 76 mm | 20 – 300 |
| Divider Plate Thickness | 3.18 mm | 1 – 12 |
| Bilge Plate Length | 152 mm | 50 – 500 |
| Bilge Plate Width | 203 mm | 50 – 600 |
| Bilge Plate Thickness | 3.18 mm | 1 – 12 |
| Bilge Plate From Transom | 50.8 mm | 0 – 500 |
| Bilge Plate Floor Lift | 12.7 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu