Brackets and mounts
Jersey Barrier
- Bounding box
- 2000.0 × 610.0 × 820.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-piece precast concrete highway median barrier, similar to a Jersey barrier. Dimensions: - Overall length: 2000 mm - Overall height: 820 mm - Maximum base width: 610 mm - Top width: 295 mm Geometry: - Long rectangular barrier running along the X axis. - Symmetrical trapezoidal cross-section when viewed from the end. - Wide and heavy base with sloped sides. - The lower section has gently curved transitions from the wide base into the narrower upper section. - The upper section is mostly vertical with a slightly tapered profile. - Flat horizontal top surface. - Flat vertical end faces. - No holes, no openings, no mounting hardware. - Solid concrete body. - Add small fillets to sharp external edges, approximately 5 mm radius. - Keep the geometry simple, manufacturable and suitable for a precast concrete mold. The result must be one continuous solid body, not an assembly. Use millimeters and make all dimensions explicit and editable parameters. Generate a clean engineering-grade parametric CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 2000 mm | 1000 – 4000 |
| Overall Height | 820 mm | 400 – 1200 |
| Base Width | 610 mm | 400 – 800 |
| Top Width | 295 mm | 150 – 450 |
| Lower Vertical Height | 75 mm | 50 – 200 |
| Upper Section Start Height | 500 mm | 300 – 700 |
| Upper Section Bottom Width | 335 mm | 250 – 450 |
| Fillet Radius | 5 mm | 0.5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent