Everything else
IUD Placement Handle
- Bounding box
- 140.0 × 40.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 18, 2026
Download
Free to download and use. See the terms.
The prompt
using this image and the previous directions, please try again
Parameters
| Name | Value | Range |
|---|---|---|
| Handle Length | 125 mm | 80 – 200 |
| Handle Width | 35 mm | 25 – 60 |
| Handle Height | 28 mm | 15 – 50 |
| Wall Thickness | 2.5 mm | 2 – 5 |
| Corner Radius | 3 mm | 0 – 8 |
| Channel Width | 14 mm | 6 – 25 |
| Channel Height | 10 mm | 4 – 20 |
| Divider Wall Thickness | 2 mm | 1 – 6 |
| Shaft X Position | 0 mm | -50 – 50 |
| Shaft Z Position | 0 mm | -10 – 10 |
| Shaft Diameter | 5 mm | 2 – 12 |
| Shaft Length | 20 mm | 10 – 40 |
| Bearing Bore Diameter | 6.5 mm | 5 – 15 |
| Groove Width | 1.4 mm | 1.2 – 1.5 |
| Groove Depth | 1.2 mm | 1 – 1.5 |
| Flange Width | 2 mm | 1 – 5 |
| Handwheel Diameter | 24 mm | 22 – 26 |
| Handwheel Thickness | 6 mm | 5 – 7 |
| Handwheel Ridge Count | 12 mm | 6 – 20 |
| Handwheel Ridge Depth | 1.5 mm | 0.5 – 3 |
| Handwheel Ridge Width | 1.5 mm | 1 – 3 |
| Connector Outer Diameter | 11 mm | 8 – 16 |
| Connector Thread Length | 10 mm | 10 – 12 |
| Connector Shoulder Diameter | 14 mm | 11 – 20 |
| Connector Shoulder Length | 3 mm | 1 – 8 |
| Connector Bore Diameter | 5 mm | 2 – 10 |
| Screw Boss Diameter | 6 mm | 3 – 10 |
| Screw Hole Diameter | 2.5 mm | 1.5 – 4 |
| Alignment Pin Diameter | 2 mm | 1 – 4 |
| Alignment Pin Hole Diameter | 2.2 mm | 1.2 – 4.2 |
| Thread Pitch | 1 mm | 0.5 – 3 |
| Thread Depth | 0.6 mm | 0.2 – 1.5 |
| Thread Groove Width | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm