iPad Air 11 Tabletop Kiosk Case (AstraZeneca)

1 views

Bounding box: 252.9 × 183.8 × 15.2 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

create a tabletop m1 11 inch m1 ipad air encasing. it should be pretty minimal to print as fast as possible. its for a POC for a healthcare kiosk running on the ipad. It should have the asatrazeneca logo on the top of the border of the encasing

Parameters

Name	Value	Range
iPad width, landscape	247.6 mm	150 – 330
iPad height, landscape	178.5 mm	100 – 240
iPad thickness	6.1 mm	3 – 15
Wall thickness	2.4 mm	1.2 – 6
Pocket clearance per side	0.25 mm	0.1 – 0.6
Back plate thickness	2.4 mm	1.6 – 8
Rim height above back plate	9 mm	6 – 30
Bezel border width around screen	7 mm	4 – 20
Bezel thickness	3 mm	1.6 – 8
Outer corner radius	6 mm	1 – 20
Charging notch width	16 mm	8 – 40
Charging notch height	5 mm	3 – 9
Logo width	52 mm	20 – 120
Logo letter height	4.5 mm	2 – 6.5
Logo emboss height	0.8 mm	0.6 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS