Everything else
IoT Sensor Node with Irrigation Pipe and Valve
- Bounding box
- 155.0 × 169.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 1, 2026
Download
Free to download and use. See the terms.
The prompt
3D_SURFACE_SOIL: The main 3D mesh landscape representing fields, crop beds, and elevation.3D_IOT_NODES: High-visibility 3D block models of the physical sensor stakes.3D_INFRASTRUCTURE: 3D models of greenhouses, water tanks, and drone charging pads.3D_VALVES_PIPES: Subsurface 3D piping routing water to different crop zones.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 60 mm | 20 – 200 |
| Body Depth | 40 mm | 20 – 200 |
| Body Height | 30 mm | 10 – 100 |
| Mounting Plate Width | 80 mm | 20 – 200 |
| Mounting Plate Depth | 30 mm | 10 – 100 |
| Mounting Plate Thickness | 5 mm | 2 – 20 |
| Mounting Hole Diameter | 5 mm | 2 – 12 |
| Probe Diameter | 8 mm | 2 – 20 |
| Probe Length | 50 mm | 10 – 200 |
| Antenna Diameter | 6 mm | 2 – 20 |
| Antenna Height | 20 mm | 5 – 100 |
| Lens Diameter | 10 mm | 2 – 30 |
| Lens Height | 5 mm | 2 – 20 |
| Body Fillet Radius | 3 mm | 0 – 10 |
| Pipe Diameter | 20 mm | 5 – 50 |
| Pipe Length | 120 mm | 20 – 500 |
| Valve Size | 30 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like