Gears and transmission
Involute Spur Pinion m10 z158
- Bounding box
- 1600.1 × 1599.9 × 70.1 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
pinion, teeth 158; modul 10; tooth width 70 mm; pitch cirlce diameter 1580 mm; Involute gearing
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 10 mm | 1 – 30 |
| Number of Teeth | 158 teeth | 12 – 300 |
| Tooth / Face Width | 70 mm | 20 – 200 |
| Helix Angle | 0 rad | -0.35 – 0.35 |
| Bore Diameter | 200 mm | 50 – 600 |
| Lightening Hole Count | 6 count | 4 – 12 |
| Lightening Hole Diameter | 150 mm | 40 – 200 |
| Lightening Hole Circle Dia | 1000 mm | 400 – 1300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled