Gears and transmission
Internal Ring Gear - 360 Teeth
- Bounding box
- 23.0 × 23.0 × 2.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Separate internal ring gear part: 23 mm outside diameter, 22 mm tooth-tip inside diameter, 360 inward-facing fine teeth, 2 mm face width. Fine trapezoidal tooth approximation for CAD layout; verify tooth form, clearances and manufacturing tolerances before functional meshing.
Parameters
| Name | Value | Range |
|---|---|---|
| Outside diameter | 23 mm | 22.8 – 23 |
| Tooth-tip inside diameter | 22 mm | 21.5 – 22 |
| Face width | 2 mm | 0.5 – 5 |
| Tooth count | 360 teeth | 360 – 360 |
| Radial tooth depth | 0.08 mm | 0.04 – 0.12 |
| Tooth tip fraction | 0.5 ratio | 0.35 – 0.65 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled