Enclosures and housings
Interlocking Cylindrical Enclosure DIA80 x 200 mm
- Bounding box
- 80.0 × 80.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
"Generate a 3D printable mechanical enclosure split into two interlocking halves. The main outer body is a hollow cylinder with a total outer diameter of 80.0 mm and a total height of 200.0 mm. The main wall thickness must be exactly 2.4 mm. The bottom half must feature a male interlocking ridge with an outer diameter of 77.6 mm, a wall thickness of 1.2 mm, and a ridge height of 4.0 mm. The top half must feature a matching female pocket cutout with a diameter of 78.0 mm and a depth of 4.2 mm to allow for a 0.4 mm sliding clearance tolerance. Add 3.2 mm diameter screw holes located exactly 2.0 mm down from the horizontal seam line for M3 hex Bolts
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 80 mm | 20 – 200 |
| Wall Thickness | 2.4 mm | 1 – 8 |
| Bottom Half Body Height | 100 mm | 10 – 150 |
| Top Half Height | 100 mm | 10 – 150 |
| Male Ridge OD | 77.6 mm | 10 – 200 |
| Male Ridge Wall | 1.2 mm | 0.5 – 4 |
| Male Ridge Height | 4 mm | 1 – 15 |
| Female Pocket Dia | 78 mm | 10 – 200 |
| Female Pocket Depth | 4.2 mm | 1 – 20 |
| Screw Hole Dia (M3) | 3.2 mm | 1.6 – 6 |
| Screw Hole Count | 4 pcs | 2 – 12 |
| Hole Drop Below Seam | 2 mm | 0.5 – 20 |
| Free-End Edge Fillet | 0.8 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w