Brackets and mounts
Interlocking Bracket Plates (5 sizes)
- Bounding box
- 79.0 × 44.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
create a bracket with an 13 mm diameter hole surroundet by a square. the squares should have nudges and buldges to interlock indefinetly. the bracket should be 8 mm high and have 4 small recktangles to secure the cylinder later put in the 13 mm hole. repeat this procces for 13.5 mm diameter holes, 15.2 mm holes and, 15.5 mm holes and 21 mm holes. adapt the square size accordingly
Parameters
| Name | Value | Range |
|---|---|---|
| Hole Dia 13 mm | 13 mm | 5 – 50 |
| Square Side 13 mm | 30 mm | 20 – 100 |
| Hole Dia 13.5 mm | 13.5 mm | 5 – 50 |
| Square Side 13.5 mm | 31 mm | 20 – 100 |
| Hole Dia 15.2 mm | 15.2 mm | 5 – 50 |
| Square Side 15.2 mm | 33 mm | 20 – 100 |
| Hole Dia 15.5 mm | 15.5 mm | 5 – 50 |
| Square Side 15.5 mm | 34 mm | 20 – 100 |
| Hole Dia 21 mm | 21 mm | 5 – 50 |
| Square Side 21 mm | 40 mm | 20 – 100 |
| Bracket Height | 8 mm | 2 – 20 |
| Tab Width | 2 mm | 0.5 – 15 |
| Tab Length | 8 mm | 0.5 – 15 |
| Interlock Depth | 2 mm | 0.5 – 5 |
| Layout Gap | 10 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent