Loading the interactive model…
Interactive 3D model of Inline-4 Engine Block with Full Crankshaft and FlywheelEverything else
Inline-4 Engine Block with Full Crankshaft and Flywheel
1 views
- Bounding box
- 509.5 × 200.1 × 235.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 1, 2026
Download
Free to download and use. See the terms.
The prompt
BUILD WITH FULL COMPONENT
Parameters
| Name | Value | Range |
|---|---|---|
| Cylinder Count | 4 | 2 – 8 |
| Cylinder Bore Diameter | 86 mm | 50 – 120 |
| Cylinder Spacing | 100 mm | 60 – 150 |
| Deck Height | 120 mm | 80 – 200 |
| Block Width | 150 mm | 100 – 250 |
| Crankcase Height | 100 mm | 60 – 180 |
| Crank Bore Diameter | 60 mm | 40 – 100 |
| Wall Thickness | 8 mm | 4 – 20 |
| Head Bolt Diameter | 10 mm | 6 – 16 |
| Oil Pan Width | 180 mm | 120 – 250 |
| Flange Thickness | 10 mm | 6 – 20 |
| Fillet Radius | 4 mm | 1 – 10 |
| Stroke | 86 mm | 60 – 120 |
| Main Journal Diameter | 50 mm | 30 – 80 |
| Main Journal Width | 20 mm | 10 – 40 |
| Crank Pin Diameter | 45 mm | 30 – 70 |
| Crank Pin Width | 20 mm | 10 – 40 |
| Counterweight Thickness | 18 mm | 10 – 30 |
| Flywheel Diameter | 200 mm | 150 – 300 |
| Flywheel Thickness | 15 mm | 10 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS