Gears and transmission
Injection Molding Robot Cell Assembly
- Bounding box
- 5300.0 × 5200.0 × 3075.0 mm
- Engine
- Precision B-rep
- Parameters
- 50
- Published
- August 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design a realistic industrial robotic automation system for an injection molding machine, inspired by the general architecture of industrial gantry robots. Create a 3-axis servo gantry robot mounted above/alongside an injection molding machine. The system should include: Horizontal X-axis linear rail mounted above the injection molding machine Vertical Z-axis servo-driven linear carriage Horizontal Y-axis telescopic/linear arm extending toward the mold area End-of-arm robotic gripper for picking molded plastic parts Injection molding machine with fixed and moving mold plates Mold cavity area clearly visible Part collection conveyor below the robot Electrical/control cabinet mounted beside the machine Servo motors, gearboxes, linear guide rails and belt/ball-screw mechanisms represented realistically Safety guarding around the robotic working area Emergency-stop/control panel Proper mechanical brackets and structural supports Make the design industrial, mechanically realistic and manufacturable, with the robot positioned so that the gripper can enter the mold, pick the finished component, retract, and place it onto the conveyor. The final model should look like a professional industrial injection-molding automation cell, not a simplified educational robot. Use realistic proportions, rigid structural members, linear guides, motor housings, mounting plates and mechanical joints.
Parameters
| Name | Value | Range |
|---|---|---|
| Machine base length | 4000 mm | 2000 – 6000 |
| Machine base width | 1200 mm | 800 – 2000 |
| Machine base height | 400 mm | 200 – 800 |
| C-frame column depth | 300 mm | 100 – 600 |
| C-frame column height | 900 mm | 300 – 1500 |
| Injection barrel diameter | 120 mm | 60 – 300 |
| Injection barrel length | 1000 mm | 300 – 2000 |
| Fixed platen width | 900 mm | 600 – 1500 |
| Fixed platen height | 900 mm | 600 – 1500 |
| Fixed platen thickness | 120 mm | 60 – 300 |
| Moving platen width | 900 mm | 600 – 1500 |
| Moving platen height | 900 mm | 600 – 1500 |
| Moving platen thickness | 120 mm | 60 – 300 |
| Mold insert thickness (X) | 80 mm | 40 – 200 |
| Mold insert width (Y) | 300 mm | 100 – 600 |
| Mold insert height (Z) | 300 mm | 100 – 600 |
| Cavity depth (X) | 40 mm | 5 – 150 |
| Cavity width (Y) | 180 mm | 20 – 500 |
| Cavity height (Z) | 180 mm | 20 – 500 |
| Gantry overall length (X) | 4600 mm | 3000 – 8000 |
| Gantry overall width (Y) | 4200 mm | 2000 – 8000 |
| Gantry overall height | 2800 mm | 1500 – 5000 |
| Gantry column cross-section | 250 mm | 100 – 500 |
| Top bridge beam height | 300 mm | 100 – 600 |
| X-axis rail length | 4600 mm | 2000 – 8000 |
| X-axis rail width | 300 mm | 100 – 600 |
| X-axis rail height | 200 mm | 50 – 400 |
| Z-axis vertical column length | 2100 mm | 500 – 4000 |
| Z-axis column X depth | 250 mm | 80 – 500 |
| Z-axis column Y depth | 250 mm | 80 – 500 |
| Y-axis telescopic arm length | 1200 mm | 300 – 2500 |
| Y-axis arm width | 120 mm | 40 – 300 |
| Y-axis arm height | 120 mm | 40 – 300 |
| Gripper body length (X) | 250 mm | 80 – 600 |
| Gripper body width (Y) | 150 mm | 50 – 400 |
| Gripper body height (Z) | 100 mm | 30 – 300 |
| Gripper finger width | 30 mm | 5 – 100 |
| Gripper finger downward depth | 100 mm | 10 – 200 |
| Conveyor length | 3000 mm | 1000 – 6000 |
| Conveyor width | 400 mm | 200 – 1000 |
| Conveyor height | 250 mm | 100 – 600 |
| Control cabinet length | 600 mm | 300 – 1500 |
| Control cabinet width | 600 mm | 300 – 1500 |
| Control cabinet height | 2000 mm | 500 – 3000 |
| Safety guard area length (X) | 5200 mm | 2000 – 10000 |
| Safety guard area width (Y) | 5200 mm | 2000 – 10000 |
| Safety guard height | 2500 mm | 1000 – 4000 |
| Guard post cross-section | 100 mm | 40 – 300 |
| Guard panel thickness | 30 mm | 5 – 100 |
| Safety floor plate thickness | 50 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a