Brackets and mounts
Industrial Powder-Coating Hanger Stand (Staggered Rows)
- Bounding box
- 6120.0 × 6800.0 × 3505.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional industrial powder-coating hanger stand for aluminum profiles. The aluminum profiles are 6.6 meters long and must be hung horizontally, not vertically. The stand must have two separate columns/rows of hanging hooks, arranged in a staggered/offset configuration, so the two rows are not directly facing each other. This is important because the operator must be able to spray the front, back, top, bottom, and sides of the aluminum profiles without the profiles or hooks blocking the spray gun. Each column should have multiple heavy-duty hooks/hangers along its length. The hooks must securely support long aluminum profiles while allowing good electrical contact for electrostatic powder coating and grounding. Requirements: * Aluminum profile length: 6.6 m * Profiles positioned horizontally * Two staggered hanging rows * Rows should be offset from each other * Adequate clearance between the two rows for a powder-coating operator * Heavy-duty steel frame * Strong enough for multiple aluminum profiles * Hooks should be removable/replaceable * Hooks should provide reliable electrical contact with the aluminum * Main frame must have a proper grounding connection * Stable base with wheels or suitable industrial supports * Design for an industrial powder-coating workshop * Avoid unnecessary cross-members that would obstruct spraying * Provide realistic dimensions and structural proportions * Show a 3D model plus front, side, and top views * Include dimensions for the overall stand, hook spacing, row spacing, and profile clearance. The most important requirement is that the two rows must NOT be directly opposite each other. They must be staggered so the powder gun can reach the aluminum profiles from different angles.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X) | 6000 mm | 5000 – 8000 |
| Base Width (Y) | 6800 mm | 6000 – 8000 |
| Base Height (Z) | 250 mm | 200 – 400 |
| Column Width (square) | 100 mm | 80 – 150 |
| Column Height | 2400 mm | 2000 – 3000 |
| Front Row Y Position | 100 mm | 0 – 500 |
| Rear Row Y Position | 6700 mm | 6000 – 7000 |
| Front Col Start X | 0 mm | -500 – 500 |
| Front Col X Spacing | 1000 mm | 500 – 2000 |
| Number of Front Columns | 4 | 1 – 10 |
| Rear Col Start X | 2400 mm | 0 – 5000 |
| Rear Col X Spacing | 1000 mm | 500 – 2000 |
| Number of Rear Columns | 4 | 1 – 10 |
| Hook Plane Offset (inward) | 400 mm | 200 – 800 |
| Hook Reach | 150 mm | 100 – 300 |
| Hook Wire Diameter | 8 mm | 4 – 12 |
| Hook Z Position 1 | 600 mm | 0 – 2500 |
| Hook Z Position 2 | 1100 mm | 0 – 2500 |
| Hook Z Position 3 | 1600 mm | 0 – 2500 |
| Hook Z Position 4 | 2100 mm | 0 – 2500 |
| Castor Diameter | 120 mm | 80 – 200 |
| Castor Height | 50 mm | 20 – 100 |
| Leveling Foot Diameter | 80 mm | 50 – 150 |
| Leveling Foot Height | 60 mm | 20 – 100 |
| Tie Beam Depth (Z) | 120 mm | 80 – 200 |
| Tie Beam Width (Y) | 60 mm | 40 – 100 |
| Tie Beam Z Height | 2400 mm | 2000 – 3000 |
| Diagonal Brace Length | 1200 mm | 800 – 2000 |
| Brace Section Width | 80 mm | 50 – 100 |
| Grounding Strip Length | 200 mm | 100 – 500 |
| Grounding Strip Width | 25 mm | 20 – 60 |
| Grounding Strip Thickness | 3 mm | 1 – 10 |
| Earth Cable Diameter | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent