Plates and panels
Industrial Gable Shed 15m x 20m x 10m with central 6x5m entrance and left louvred vent
- Bounding box
- 15000.0 × 40000.0 × 10000.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Industrial steel-frame shed building. 15000mm front width x 20000mm longitudinal depth x 10000mm maximum ridge height. 100mm full reinforced concrete floor slab; gabled pitched roof from eaves 8200 to ridge 10000; centered 6000mm wide by 5000mm high open entrance on short front 15m face; rear and sides cladded; left longitudinal wall has one horizontal rectangular 4500x1200mm high louvred vent (six slats) at high level. Named separate roof panels, wall sheets, support posts, rafters and purlins. Conceptual GA not load-tested or local structural code certified.
Parameters
| Name | Value | Range |
|---|---|---|
| Shed overall width | 15000 mm | 15000 – 15000 |
| Shed overall length | 20000 mm | 20000 – 20000 |
| Maximum ridge height | 10000 mm | 10000 – 10000 |
| Wall eave height | 8200 mm | 7800 – 8500 |
| Floor slab thickness | 100 mm | 100 – 100 |
| Clear entrance width | 6000 mm | 6000 – 6000 |
| Clear entrance height | 5000 mm | 5000 – 5000 |
| Left rectangular ventilation opening length | 4500 mm | 3500 – 5500 |
| Rectangular vent opening height | 1200 mm | 800 – 1600 |
| Vent bottom height | 6000 mm | 5400 – 6200 |
| Wall cladding thickness | 55 mm | 40 – 80 |
| Indicative roof thickness | 75 mm | 60 – 100 |
| Steel column section envelope | 180 mm | 140 – 240 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Modular Commercial Kiosk Container
A modern modular commercial kiosk container, 4.5m in width, 2.5m in depth, and 3.35m in total height. The main body is a hollow rectangular prism with a wall, floor, and roof thick
Electric Control Panel 1m
I want an electric panel 1m by 1m with green start and red stop bottom