Brackets and mounts
Industrial Enclosure with Hinged Door
- Bounding box
- 710.0 × 275.0 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D CAD model of an industrial electronics enclosure consisting of two separate parts: a main box (base) and a bottom-hinged door. Part 1: Main Box (Base) - Create a solid block of 330mm width, 270mm height, and 82mm depth. - Subtract an inner pocket from the front to make it hollow: inner pocket width 322mm, inner pocket height 262mm, and inner pocket depth 78mm. This leaves a uniform wall thickness of 4mm on the sides and a 4mm solid back wall. - On the back wall, add four 5mm holes (one in each corner) for wall mounting. - At the bottom outer face, add a horizontal cylindrical hinge rod receptacle spanning the width, with a 3mm through-hole for a hinge pin. Part 2: Front Door (Lid) - Create a flat solid plate of 330mm width, 270mm height, and 4mm thickness. - Cut a rectangular display hole exactly centered in the middle of this plate. Cutout dimensions: width 312mm, height 250mm. - At the bottom edge of this plate, add interlocking hinge loops that align with the bottom hinge of Part 1, featuring a matching 3mm through-hole. Design Constraints: - Do not add any legs, pillars, or external pegs underneath or outside the box. - Keep all outer vertical corners smooth with a 3mm radius.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Width | 330 mm | 200 – 500 |
| Box Height | 270 mm | 150 – 500 |
| Box Depth | 82 mm | 50 – 150 |
| Wall Thickness | 4 mm | 2 – 10 |
| Mounting Hole Diameter | 5 mm | 3 – 10 |
| Mounting Hole Edge Offset | 10 mm | 5 – 30 |
| Hinge Cylinder Diameter | 10 mm | 6 – 20 |
| Hinge Pin Hole Diameter | 3 mm | 1 – 6 |
| Door Plate Thickness | 4 mm | 2 – 8 |
| Display Cutout Width | 312 mm | 200 – 320 |
| Display Cutout Height | 250 mm | 150 – 260 |
| Number of Door Hinge Loops | 3 | 2 – 6 |
| Door Hinge Loop Length | 20 mm | 10 – 30 |
| Layout Gap Between Parts | 50 mm | 10 – 200 |
| Outer Corner Fillet Radius | 3 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu