Brackets and mounts
Industrial Electronics Enclosure with Lid
- Bounding box
- 137.0 × 60.8 × 37.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D-printable industrial electronics enclosure (project box) with a detachable top lid, optimized for FDM 3D printing (watertight, clean topology). Main specifications: - Internal box dimensions: Length 133mm, Width 56.8mm, Total internal height 35mm. (This leaves a 3mm safety clearance around the Mean Well LPS-75 PCB). - Wall thickness: 2mm for all walls and the bottom base. - Internal Mounting Pillars: Add 4 cylindrical mounting bosses on the bottom inside floor. Each pillar must be 5mm tall, with an outer diameter of 6mm and a 2.5mm inner hole for M3 self-tapping screws. - Pillar positions: The 4 pillars must form a rectangle centered on the bottom floor, spaced exactly 115.6mm apart lengthwise and 44.2mm apart widthwise. - Ventilation: Add horizontal cooling slots/grills on both longer side walls to prevent overheating of the 75W power supply. - Cable Access: Add one U-shaped cutout (width 12mm, depth 10mm) centered on the left short wall for AC input cables, and one identical U-shaped cutout centered on the right short wall for DC output cables. - Output: Deliver as a clean, manufacturing-ready STEP or STL file.
Parameters
| Name | Value | Range |
|---|---|---|
| Internal Length | 133 mm | 100 – 200 |
| Internal Width | 56.8 mm | 40 – 100 |
| Internal Height | 35 mm | 20 – 80 |
| Wall Thickness | 2 mm | 1 – 5 |
| Pillar Height | 5 mm | 3 – 10 |
| Pillar Outer Diameter | 6 mm | 4 – 10 |
| Pillar Inner Diameter | 2.5 mm | 1.5 – 5 |
| Pillar Spacing Lengthwise | 115.6 mm | 80 – 180 |
| Pillar Spacing Widthwise | 44.2 mm | 30 – 80 |
| Cutout Width | 12 mm | 5 – 20 |
| Cutout Depth | 10 mm | 5 – 20 |
| Vent Slot Width | 2 mm | 1 – 5 |
| Vent Slot Length | 20 mm | 10 – 60 |
| Vent Slot Count per Side | 4 | 1 – 10 |
| Lid Thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent