Gears and transmission
Industrial 3D Bending Test Machine Assembly
- Bounding box
- 700.0 × 450.0 × 1600.0 mm
- Engine
- Precision B-rep
- Parameters
- 55
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a modern industrial 3D bending test machine. The machine has a strong rectangular steel base, two fixed roller supports for a simply supported beam specimen, and a central vertical square tower containing a 450 mm lead screw. Add a guided moving crosshead carrying a load cell and a central compression loading head. Include a rear linear guide shaft, a 12V geared motor and gearbox underneath the base, a KTC-50 displacement sensor below the specimen, and a modern 7-inch touchscreen control panel. Use a professional industrial design, dark grey and metallic finishes. Show the complete machine in an isometric 3D view. All dimensions in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 700 mm | 500 – 1000 |
| Base Depth | 450 mm | 300 – 700 |
| Base Height | 80 mm | 40 – 120 |
| Roller Support Length | 100 mm | 60 – 160 |
| Roller Support Depth | 80 mm | 60 – 120 |
| Roller Support Height | 120 mm | 80 – 180 |
| Roller Diameter | 30 mm | 20 – 50 |
| Roller Support Spacing | 400 mm | 250 – 600 |
| Tower Section Size | 160 mm | 120 – 240 |
| Tower Depth | 160 mm | 120 – 240 |
| Tower Height | 900 mm | 600 – 1200 |
| Tower Wall Thickness | 10 mm | 5 – 20 |
| Tower Y Offset | 115 mm | 50 – 180 |
| Tower Slot Width | 240 mm | 160 – 300 |
| Tower Slot Depth | 100 mm | 50 – 160 |
| Tower Slot Height | 600 mm | 300 – 900 |
| Lead Screw Diameter | 20 mm | 12 – 40 |
| Lead Screw Length | 450 mm | 300 – 600 |
| Lead Screw Y Position | 75 mm | 30 – 120 |
| Lead Screw Z Center | 530 mm | 300 – 700 |
| Guide Shaft Diameter | 25 mm | 15 – 40 |
| Guide Shaft Length | 800 mm | 500 – 1000 |
| Guide Shaft Y Position | 115 mm | 50 – 160 |
| Guide Shaft Z Center | 480 mm | 200 – 700 |
| Crosshead Length | 220 mm | 160 – 300 |
| Crosshead Depth | 160 mm | 100 – 220 |
| Crosshead Height | 50 mm | 30 – 80 |
| Crosshead Y Center | 45 mm | 0 – 100 |
| Crosshead Z Center | 530 mm | 300 – 700 |
| Lead Screw Clearance Diameter | 22 mm | 18 – 30 |
| Guide Shaft Clearance Diameter | 26 mm | 20 – 35 |
| Load Cell Length | 80 mm | 50 – 120 |
| Load Cell Depth | 50 mm | 30 – 80 |
| Load Cell Height | 50 mm | 30 – 80 |
| Load Cell Y Position | 0 mm | -30 – 30 |
| Load Cell Z Center | 480 mm | 300 – 600 |
| Loading Head Diameter | 60 mm | 40 – 100 |
| Loading Head Height | 80 mm | 40 – 150 |
| Loading Head Y Position | 0 mm | -30 – 30 |
| Loading Head Z Center | 415 mm | 250 – 500 |
| Motor Length | 120 mm | 80 – 160 |
| Motor Depth | 90 mm | 60 – 140 |
| Motor Height | 100 mm | 60 – 140 |
| Motor Y Position | 75 mm | 30 – 120 |
| Motor Z Center | -50 mm | -150 – -20 |
| Displacement Sensor Diameter | 30 mm | 20 – 40 |
| Displacement Sensor Length | 120 mm | 80 – 180 |
| Sensor Y Position | 0 mm | -30 – 30 |
| Sensor Z Center | 140 mm | 80 – 250 |
| Panel Width | 200 mm | 140 – 260 |
| Panel Height | 140 mm | 100 – 200 |
| Panel Thickness | 35 mm | 20 – 50 |
| Panel X Center | 40 mm | -60 – 160 |
| Panel Y Center | 52.5 mm | 20 – 100 |
| Panel Z Center | 480 mm | 300 – 700 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled