Indoor Circulation Room 3.0 x 3.0 x 2.5 m

Create a precise 3D CAD model of a square indoor patio / circulation room measuring exactly 3.00 m long × 3.00 m wide × 2.50 m high. Doors: - One door located on the far (north) wall, centered on that wall. Door size: 80 cm wide × 200 cm high. - One door located on the right (east) wall, positioned near the far end of the wall. Door size: 80 cm wide × 200 cm high. Both doors open inward and must remain completely free of any furniture or equipment. Windows: - Two high rectangular windows on the far (north) wall, above the door level. Each window is approximately 90 cm wide × 60 cm high, placed side by side. Furniture placement rules (very important): - Leave a clear central circulation zone of 1.20 m × 1.20 m completely empty in the middle of the room so that people can walk freely between the two doors. - Place all equipment only against the walls, outside this central free zone. Equipment: 1. Two dispensers (coffee/water machines): - Each has a square base of 50 cm × 50 cm and a height of 190 cm. - Place the first dispenser against the left (west) wall, roughly in the middle of that wall. - Place the second dispenser against the far (north) wall, to the right of the north door, without blocking it. 2. One large notice / display board: - Mounted on the remaining free wall space (preferably on the left wall or the wall opposite the right-hand door). - Approximate size: 120 cm wide × 90 cm high, fixed on the wall at eye level. Keep the center of the room completely empty for circulation. All objects must be positioned tightly against the walls. Use clean modern industrial style, white walls, light tiled floor.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.