Plates and panels
Inclined Drain Pipe with Flow Arrow
- Bounding box
- 120.0 × 110.0 × 502.1 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
1. DRAIN A pipe, usually underground, that conveys soil water, waste water or stormwater away from a building to a sewer, conservancy tank or other approved point of discharge. architecturally correct Sketch: a section through the ground showing a pipe below a building, falling away to the left, with an arrow for flow direction and a gradient annotation.
Parameters
| Name | Value | Range |
|---|---|---|
| Pipe Outer Diameter | 110 mm | 50 – 315 |
| Pipe Wall Thickness | 3 mm | 1 – 10 |
| Pipe Length | 500 mm | 100 – 1200 |
| Fall Angle (gradient) | 1.15 deg | 0.2 – 10 |
| Arrow Length | 80 mm | 20 – 200 |
| Arrow Width | 20 mm | 5 – 60 |
| Arrow Height | 8 mm | 2 – 20 |
| Arrow Wall Overlap | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con