Brackets and mounts
IMU Holder Assembly
- Bounding box
- 32.0 × 32.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 3, 2026
Download
Free to download and use. See the terms.
The prompt
Diseña un holder CAD circular y liviano para un sensor IMU de 20.5 mm x 12.4 mm. Debe tener base y tapa removible, con cavidad interna ajustada para que el IMU no se mueva, pero con una zona de acceso de aprox. 2 mm para facilitar su extracción. Incluye una abertura lateral para la conexión de 4 pines y una ranura correspondiente en la tapa. El cierre debe ser a presión o por fricción, sin tornillos. Altura total máxima: 5 mm. Bordes redondeados, perfil bajo y cara inferior plana para fijarlo sobre un parche adhesivo médico desechable. Añade guía para el cable y alivio de tensión. Genera vista ensamblada, explotada y corte interno.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Outer Diameter | 32 mm | 20 – 50 |
| Base Height | 3 mm | 2 – 5 |
| IMU Length | 20.5 mm | 10 – 30 |
| IMU Width | 12.4 mm | 5 – 20 |
| Cavity Depth | 2.2 mm | 1 – 3 |
| Access Gap | 2 mm | 1 – 5 |
| Connector Slot Width | 4 mm | 2 – 8 |
| Connector Slot Height | 1.5 mm | 1 – 3 |
| Cable Guide Width | 3 mm | 2 – 6 |
| Cable Guide Depth | 1.5 mm | 1 – 3 |
| Wall Thickness | 1.5 mm | 1 – 3 |
| Lid Height | 2 mm | 1 – 3 |
| Lid Outer Diameter | 32 mm | 20 – 50 |
| Lid Inner Diameter | 29 mm | 20 – 48 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent