Enclosures and housings
Immersion Cooling Enclosure with Battery Array and Side Heat Sinks
- Bounding box
- 612.0 × 402.0 × 166.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wall thickness. Inside the cavity, place an array of cuboid battery cells in a 5 by 7 grid pattern. spaced with a uniform between adjacent cell walls . Include a 15mm perimeter flange at the top opening with 16 M6 clearance bolt holes and a 2mm O-ring seal groove. Include two 1-inch NPT threaded port bosses on opposite ends for dielectric fluid entry and exit. add the array of battery which is cuboid i shape place an array of battery keep the lid open make sure to add heat sink on 2 sides where there isn't a opening end. picture of heat sink given
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity length | 540 mm | 100 – 1000 |
| Cavity width | 360 mm | 100 – 800 |
| Cavity height | 160 mm | 50 – 500 |
| Wall thickness | 6 mm | 2 – 20 |
| Flange width | 15 mm | 5 – 50 |
| Flange thickness | 6 mm | 2 – 20 |
| Battery cells along length | 5 | 1 – 20 |
| Battery cells along width | 7 | 1 – 20 |
| Battery cell length | 80 mm | 20 – 200 |
| Battery cell width | 40 mm | 10 – 150 |
| Battery cell height | 150 mm | 20 – 300 |
| Battery cell gap | 8 mm | 0 – 50 |
| Bolt clearance hole diameter | 6.6 mm | 3 – 20 |
| Bolt hole count | 16 | 4 – 64 |
| O-ring groove width | 2 mm | 1 – 5 |
| O-ring groove depth | 1 mm | 0.2 – 3 |
| O-ring groove inset from outer wall | 2 mm | 0 – 12 |
| Port boss outer diameter | 50 mm | 20 – 100 |
| Port boss length | 30 mm | 10 – 100 |
| Port bore diameter | 25.4 mm | 6 – 60 |
| Port height from bottom | 80 mm | 20 – 150 |
| Fin count per side | 12 | 2 – 60 |
| Fin thickness | 2 mm | 0.8 – 6 |
| Fin protrusion | 12 mm | 4 – 30 |
| Fin height | 150 mm | 20 – 170 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w