Brackets and mounts
IMMERSION_COOLING_BOX with REMOVABLE_LID
- Bounding box
- 620.0 × 574.0 × 178.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D CAD model of a rectangular battery immersion-cooling enclosure with a separate removable lid. **Enclosure dimensions:** - Length: 610 mm - Width: 540 mm - Height: 135 mm - Wall thickness: 3 mm - Bottom thickness: 4 mm **Box design:** - Hollow rectangular box with an open top. - Four straight vertical walls and a flat bottom. - Uniform wall thickness. - Four small mounting tabs with bolt holes, one near each corner. - Two circular coolant ports, 20 mm diameter, on opposite short walls. Place one near the bottom and the other near the top. - Keep the interior unobstructed. **Lid design:** - Separate flat rectangular lid, 3 mm thick. - Lid dimensions: 620 × 550 mm. - Add evenly spaced small bolt holes around the perimeter, aligned with the enclosure mounting locations where possible. - Add a simple rectangular gasket groove on the underside of the lid. **CAD requirements:** - Model the enclosure and lid as two separate solid components. - Keep the enclosure hollow and open at the top. - Use millimetres. - Use simple, clean engineering geometry. - No battery cells, internal baffles, or decorative features. - Make the lid removable rather than fused to the enclosure. - Name the components IMMERSION_COOLING_BOX and REMOVABLE_LID. Generate an isometric view showing the box and lid, with the lid slightly raised above the enclosure to demonstrate how it fits.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 610 mm | 300 – 1200 |
| Enclosure Width | 540 mm | 200 – 1000 |
| Enclosure Height | 135 mm | 50 – 300 |
| Wall Thickness | 3 mm | 1 – 10 |
| Bottom Thickness | 4 mm | 1 – 12 |
| Coolant Port Diameter | 20 mm | 5 – 60 |
| Inlet Height (from bottom) | 30 mm | 10 – 130 |
| Outlet Height (from bottom) | 105 mm | 20 – 130 |
| Mounting Tab Length | 40 mm | 10 – 120 |
| Mounting Tab Width | 20 mm | 8 – 80 |
| Mounting Tab Thickness | 6 mm | 2 – 20 |
| Tab Bolt Hole Diameter | 7 mm | 2 – 20 |
| Lid Length | 620 mm | 300 – 1200 |
| Lid Width | 550 mm | 200 – 1000 |
| Lid Thickness | 3 mm | 1 – 15 |
| Lid Lift Above Box | 40 mm | 0 – 200 |
| Lid Bolt Hole Diameter | 7 mm | 2 – 20 |
| Gasket Groove Inset | 25 mm | 5 – 80 |
| Gasket Groove Width | 8 mm | 2 – 30 |
| Gasket Groove Depth | 1.5 mm | 0.5 – 2.5 |
| Cell Diameter | 26 mm | 10 – 40 |
| Cell Height | 65 mm | 20 – 120 |
| Terminal Diameter | 8 mm | 3 – 20 |
| Terminal Height | 4 mm | 1 – 15 |
| Columns (X) | 14 mm | 1 – 24 |
| Rows (Y) | 16 mm | 1 – 24 |
| Column Pitch | 40 mm | 20 – 60 |
| Row Pitch | 33 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu