Enclosures and housings
Immersion Cooling Battery Enclosure
- Bounding box
- 602.0 × 402.0 × 166.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wall thickness. Inside the cavity, place an array of cuboid battery cells in a 5 by 7 grid pattern. spaced with a uniform between adjacent cell walls . Include a 15mm perimeter flange at the top opening with 16 M6 clearance bolt holes and a 2mm O-ring seal groove. Include two 1-inch NPT threaded port bosses on opposite ends for dielectric fluid entry and exit. add the array of battery which is cuboid i shape place an array of battery
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Length | 540 mm | 150 – 1200 |
| Cavity Width | 360 mm | 120 – 1000 |
| Cavity Height | 160 mm | 60 – 500 |
| Wall Thickness | 6 mm | 3 – 20 |
| Flange Width | 15 mm | 8 – 40 |
| Flange Thickness | 12 mm | 6 – 30 |
| Bolt Hole Count | 16 holes | 4 – 32 |
| Bolt Hole Dia (M6 clr) | 6.6 mm | 3 – 14 |
| O-ring Groove Width | 3 mm | 1.5 – 8 |
| O-ring Groove Depth | 2 mm | 1 – 6 |
| Groove Inset From Wall | 2 mm | 1 – 6 |
| Port Boss OD | 48 mm | 25 – 100 |
| Port Boss Length | 25 mm | 10 – 60 |
| Port Bore (1" NPT) | 29 mm | 15 – 60 |
| Port Centre Height | 86 mm | 30 – 150 |
| Cells Along Length | 7 cells | 2 – 12 |
| Cells Along Width | 5 cells | 1 – 10 |
| Cell Length (X) | 50 mm | 20 – 120 |
| Cell Width (Y) | 50 mm | 20 – 120 |
| Cell Height | 120 mm | 30 – 300 |
| Gap Between Cells | 15 mm | 3 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w