Brackets and mounts
IKEA Pegboard Bracket
- Bounding box
- 75.0 × 40.0 × 34.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Bracket that will have four .25 holes 2.5 off on supports fitting on the ikea peg board
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 50 mm | 30 – 100 |
| Base Width | 40 mm | 20 – 80 |
| Base Thickness | 4 mm | 2 – 10 |
| Support Height | 30 mm | 10 – 60 |
| Support Thickness | 4 mm | 2 – 10 |
| Hole Diameter | 0.25 mm | 0.1 – 10 |
| Hole Offset from Edge | 2.5 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent