Brackets and mounts
Ice Maker Cabinet
- Bounding box
- 500.0 × 400.0 × 607.5 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a precise 3D STEP model of a wooden ice maker cabinet for CNC manufacturing with the following specifications: GENERAL DIMENSIONS: - External dimensions: Width 500 mm × Depth 400 mm × Height 600 mm - Material: Plywood 15 mm thick (all panels) - Overall weight capacity: 30 kg (compressor + water tank) MAIN BODY: - Rectangular box with open front (no front panel initially) - All edges: Square cut (no fillets or chamfers) - Back panel: 6 ventilation holes, diameter 50 mm, arranged in 2 rows of 3, centered 100 mm from top and bottom edges - Bottom panel: Internal slope of 2 degrees from back to front for water drainage (front edge 5 mm lower than back edge) - Left & right panels: No holes (solid) FRONT DOOR: - Size: 470 mm wide × 370 mm tall × 20 mm thick (separate part) - Door hinge side: Left edge - Hinge holes: 4 holes, diameter 4 mm, depth 12 mm, positioned at: - 30 mm from top, 30 mm from bottom, and centered vertically (150 mm apart) - Door handle: No handle model needed (just a flat surface) - Door clearance: 2 mm gap around all sides when closed INTERNAL COMPONENTS PLACEMENT: - Compressor shelf: 300 mm wide × 200 mm deep × 15 mm thick, positioned 100 mm above bottom floor, centered left-to-right - Water tank area: 350 mm wide × 300 mm deep × 250 mm tall, in front of compressor shelf - Pump mounting base: 100 mm × 100 mm, at bottom-right corner (front side) ASSEMBLY FEATURES: - All panels joined with wood screws (no need to model screws, just indicate hole positions) - 8 screw holes on each vertical edge: diameter 3.5 mm, spaced 100 mm apart - Rear panel removable (4 screws at corners) TOLERANCES: - All dimensions: ±0.5 mm - Hole positions: ±0.2 mm - Squareness: 0.1 mm per 100 mm OUTPUT REQUIREMENTS: - Export as STEP file (AP214 format) - Separate bodies for: Main box, door, compressor shelf - Include a simple assembly structure (mate constraints not needed) - All dimensions in millimeters ADDITIONAL NOTES: - Design for DIY construction with hand tools (saw, drill) - No curved surfaces or complex geometry - Prioritize ease of manufacturing over aesthetics - Include water drainage channel at front-bottom (5 mm deep × 20 mm wide)
Parameters
| Name | Value | Range |
|---|---|---|
| External Width (X) | 500 mm | 350 – 800 |
| External Depth (Y) | 400 mm | 300 – 600 |
| External Height (Z) | 600 mm | 450 – 900 |
| Panel Thickness | 15 mm | 10 – 25 |
| Bottom Floor Front Drop | 5 mm | 0 – 20 |
| Drain Channel Width | 20 mm | 10 – 40 |
| Drain Channel Depth | 5 mm | 3 – 10 |
| Drain Channel Length | 470 mm | 200 – 500 |
| Vent Hole Diameter | 50 mm | 10 – 100 |
| Vent Column Spacing | 150 mm | 50 – 300 |
| Vent Row Spacing | 400 mm | 100 – 500 |
| Door Width | 470 mm | 300 – 600 |
| Door Height | 370 mm | 200 – 600 |
| Door Thickness | 20 mm | 10 – 30 |
| Door Clearance Gap | 2 mm | 0.5 – 5 |
| Hinge Hole Diameter | 4 mm | 2 – 8 |
| Hinge Hole Depth | 12 mm | 5 – 20 |
| Hinge Top/Bottom Margin | 30 mm | 10 – 80 |
| Middle Hinge Pair Spacing | 150 mm | 50 – 250 |
| Compressor Shelf Width | 300 mm | 150 – 500 |
| Compressor Shelf Depth | 200 mm | 100 – 350 |
| Compressor Shelf Thickness | 15 mm | 10 – 25 |
| Shelf Height Above Floor | 100 mm | 50 – 250 |
| Pump Base Width | 100 mm | 50 – 250 |
| Pump Base Depth | 100 mm | 50 – 250 |
| Pump Base Thickness | 15 mm | 5 – 25 |
| Screw Hole Diameter | 3.5 mm | 2 – 6 |
| Screw Holes Per Edge Row | 8 | 2 – 10 |
| Screw Hole Spacing | 71.4 mm | 20 – 150 |
| Screw Hole Edge Offset | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent