Gears and transmission
Hypoid Gear Pair
- Bounding box
- 12.5 × 16.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D parametric design for a pair of matching Hypoid Gears with a 90-degree shaft angle and a 4 mm hypoid offset. Component 1: Pinion (Small Gear) - Outer Diameter: 8 mm - Shaft Bore Diameter: 2 mm - Number of Teeth: 10 teeth Component 2: Ring Gear (Large Gear) - Outer Diameter: 16 mm - Shaft Bore Diameter: 2 mm - Number of Teeth: 20 teeth (to match the 1:2 gear ratio with the pinion) Generate both gears so that they are perfectly meshed together according to these dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Pinion Outer Diameter | 8 mm | 4 – 30 |
| Pinion Bore Diameter | 2 mm | 1 – 6 |
| Pinion Teeth | 10 | 6 – 40 |
| Ring Gear Outer Diameter | 16 mm | 8 – 60 |
| Ring Gear Bore Diameter | 2 mm | 1 – 10 |
| Ring Gear Teeth | 20 | 10 – 80 |
| Hypoid Offset | 4 mm | 0 – 10 |
| Shaft Angle | 90 deg | 60 – 120 |
| Face Width Ratio (of OD) | 0.25 | 0.1 – 0.4 |
| Pressure Angle | 20 deg | 14.5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled