Brackets and mounts
HydroTrack Smart Bottle Attachment
- Bounding box
- 46.0 × 51.0 × 121.1 mm
- Engine
- Precision B-rep
- Parameters
- 54
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Use the attached image as a reference for our product HydroTrack. Create a 3D CAD prototype of our smart water bottle attachment with an integrated flow meter. The attachment must measure the amount of water flowing through it and send the data via Bluetooth to a smartphone app. Include a bottle connector at the bottom, a hollow water channel through the center, an internal flow sensor, and a compact electronics housing on the side. Keep the design modern, simple, and realistic. Use the attached image as inspiration and focus on the actual bottle attachment, not the entire bottle. Preserve the main features of our product concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Diameter | 46 mm | 24 – 80 |
| Body Height | 72 mm | 30 – 150 |
| Water Channel Diameter | 12 mm | 6 – 30 |
| Body Edge Fillet | 3 mm | 0 – 6 |
| Outlet Recess Diameter | 24 mm | 14 – 40 |
| Outlet Seal OD | 30 mm | 16 – 44 |
| Outlet Seal Thickness | 2 mm | 0.8 – 5 |
| Collar Diameter | 40 mm | 20 – 70 |
| Collar Height | 18 mm | 8 – 40 |
| Collar Bore | 26 mm | 12 – 50 |
| Thread Grooves | 3 pcs | 1 – 8 |
| Thread Groove Width | 2 mm | 0.8 – 5 |
| Turbine Housing OD | 26 mm | 12 – 50 |
| Turbine Housing Length | 20 mm | 8 – 60 |
| Turbine Hub Diameter | 10 mm | 4 – 24 |
| Turbine Hub Bore | 4 mm | 1.5 – 12 |
| Blade Count | 6 pcs | 3 – 12 |
| Turbine Position (Z) | 30 mm | 5 – 120 |
| Sensor Pocket Width | 12 mm | 5 – 30 |
| Sensor Pocket Height | 18 mm | 6 – 50 |
| Sensor Pocket Depth | 5 mm | 2 – 14 |
| Housing Cover Width | 26 mm | 12 – 60 |
| Housing Cover Height | 40 mm | 14 – 90 |
| Housing Cover Thickness | 8 mm | 3 – 20 |
| Housing Cover Position (Z) | 30 mm | 5 – 110 |
| Electronics Pocket Width | 18 mm | 8 – 45 |
| Electronics Pocket Height | 32 mm | 10 – 80 |
| Electronics Pocket Depth | 4 mm | 1.5 – 14 |
| Gasket Width | 24 mm | 10 – 60 |
| Gasket Height | 36 mm | 12 – 90 |
| Gasket Thickness | 6 mm | 2 – 16 |
| Cap Diameter | 44 mm | 24 – 80 |
| Cap Height | 14 mm | 6 – 40 |
| Cap Bore | 12 mm | 5 – 30 |
| Spout Diameter | 18 mm | 10 – 36 |
| Spout Height | 10 mm | 3 – 30 |
| Flip Lid Diameter | 40 mm | 20 – 72 |
| Flip Lid Thickness | 6 mm | 3 – 16 |
| Lid / Spout Overlap | 1.5 mm | 0.5 – 6 |
| Hinge Width | 14 mm | 6 – 36 |
| Hinge Depth | 8 mm | 3 – 22 |
| Hinge Height | 16 mm | 6 – 40 |
| Release Tab Width | 12 mm | 5 – 30 |
| Release Tab Length | 6 mm | 2 – 16 |
| Release Tab Thickness | 4 mm | 1.5 – 10 |
| Carry Loop Width | 18 mm | 8 – 40 |
| Carry Loop Height | 22 mm | 10 – 50 |
| Carry Loop Wall | 4 mm | 1.5 – 10 |
| Carry Loop Thickness | 5 mm | 2 – 14 |
| Carry Loop Embed | 5 mm | 1 – 16 |
| Carry Loop Rise | 6 mm | 0 – 30 |
| Logo Recess Width | 14 mm | 4 – 34 |
| Logo Recess Height | 5 mm | 1.5 – 16 |
| Logo Recess Depth | 0.8 mm | 0.2 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu