Brackets and mounts
HydroQualis Enclosure Exploded Assembly
- Bounding box
- 2910.0 × 98.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 84
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Design a realistic, manufacturable 3D enclosure for **HydroQualis**, an industrial IoT water-monitoring and automatic shutoff controller. **Dimensions:** - Enclosure: 240 × 180 × 80 mm (W × H × D). - PCB: 210 × 150 × 1.6 mm. - Wall thickness: 3 mm. - Material: ABS or polycarbonate. - Wall-mounted, indoor installation. **Front panel:** - Modern, minimal industrial design. - HydroQualis logo at the top. - Central OLED screen showing pH, TDS, temperature, flow and water status. - Green, yellow and red indicator LEDs. - Buzzer grille. - RESET and EMERGENCY SHUTOFF buttons, clearly distinguished. **Connections:** - Left: USB-C and BNC pH connector. - Bottom: TDS, flow, temperature, optional turbidity, valve and feedback connectors. - Right: separate valve power input and protected UART service access. **Internal design:** - Removable front cover and rear base. - Four M3 PCB mounting standoffs aligned with the actual PCB holes. - Four separate wall-mounting holes. - Adequate connector, cable and screw clearance. - ESP32 antenna clearance. - Separate sensitive pH electronics from power and valve-driver circuits. **Deliverables:** assembled 3D model, exploded view, front/rear/side views, dimensioned drawing, STEP and STL files. Make it elegant, compact, realistic and suitable for industrial prototyping. Do not invent PCB hole coordinates or connector dimensions; use actual component specifications.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 260 mm | 220 – 500 |
| Enclosure Width | 240 mm | 100 – 500 |
| Enclosure Height | 180 mm | 80 – 400 |
| Enclosure Depth | 80 mm | 40 – 200 |
| Wall Thickness | 3 mm | 1 – 10 |
| Partition X Position | 130 mm | 20 – 220 |
| Partition Thickness | 3 mm | 1 – 8 |
| Screw Boss Outer Radius | 4 mm | 2 – 8 |
| Screw Boss Depth | 8 mm | 4 – 20 |
| Boss X Inset | 15 mm | 5 – 50 |
| Boss Z Inset | 15 mm | 5 – 50 |
| Wall Mount Hole Dia | 5 mm | 2 – 12 |
| Wall Mount Hole X Offset | 20 mm | 5 – 80 |
| Wall Mount Hole Z Offset | 30 mm | 5 – 80 |
| USB-C Cutout Y | 40 mm | 5 – 70 |
| USB-C Cutout Z | 60 mm | 5 – 170 |
| USB-C Cutout Width | 9.2 mm | 5 – 20 |
| USB-C Cutout Height | 4.5 mm | 2 – 12 |
| BNC Cutout Y | 40 mm | 5 – 70 |
| BNC Cutout Z | 30 mm | 5 – 170 |
| BNC Cutout Dia | 14 mm | 8 – 25 |
| Bottom Connector Cutout Dia | 12 mm | 6 – 25 |
| Bottom Conn 1 X | 40 mm | 5 – 230 |
| Bottom Conn 1 Y | 30 mm | 5 – 75 |
| Bottom Conn 2 X | 100 mm | 5 – 230 |
| Bottom Conn 2 Y | 30 mm | 5 – 75 |
| Bottom Conn 3 X | 160 mm | 5 – 230 |
| Bottom Conn 3 Y | 30 mm | 5 – 75 |
| Bottom Conn 4 X | 200 mm | 5 – 230 |
| Bottom Conn 4 Y | 30 mm | 5 – 75 |
| Right Valve Cutout Dia | 14 mm | 8 – 25 |
| Right Valve Cutout Y | 50 mm | 5 – 70 |
| Right Valve Cutout Z | 60 mm | 5 – 170 |
| Right UART Cutout Width | 20 mm | 8 – 40 |
| Right UART Cutout Height | 12 mm | 5 – 30 |
| Right UART Cutout Y | 40 mm | 5 – 70 |
| Right UART Cutout Z | 30 mm | 5 – 170 |
| Front Cover Thickness | 3 mm | 1 – 8 |
| OLED Window Width | 76 mm | 40 – 200 |
| OLED Window Height | 40 mm | 20 – 120 |
| OLED Window Center Z | 100 mm | 30 – 160 |
| LED Aperture Dia | 6 mm | 2 – 12 |
| LED Spacing | 20 mm | 5 – 60 |
| LED X Center | 120 mm | 20 – 220 |
| LED Center Z | 70 mm | 20 – 160 |
| Buzzer Grille Dia | 16 mm | 8 – 40 |
| Buzzer Grille Center Z | 50 mm | 20 – 160 |
| RESET Opening Dia | 7 mm | 3 – 15 |
| RESET Opening X | 50 mm | 10 – 100 |
| RESET Opening Center Z | 20 mm | 5 – 80 |
| E-Stop Opening Dia | 24 mm | 15 – 50 |
| E-Stop Opening X | 190 mm | 120 – 230 |
| E-Stop Opening Center Z | 20 mm | 5 – 80 |
| Front Cover Screw Hole Dia | 3.2 mm | 2 – 6 |
| PCB Width | 210 mm | 50 – 250 |
| PCB Height | 150 mm | 50 – 200 |
| PCB Thickness | 1.6 mm | 0.5 – 5 |
| PCB Mounting Hole Dia | 3.2 mm | 2 – 6 |
| PCB Hole X Inset | 5 mm | 2 – 30 |
| PCB Hole Y Inset | 5 mm | 2 – 30 |
| Standoff Outer Dia | 6 mm | 3 – 12 |
| Standoff Inner Dia | 3.2 mm | 2 – 6 |
| Standoff Height | 10 mm | 4 – 30 |
| OLED Module Width | 76 mm | 40 – 200 |
| OLED Module Height | 40 mm | 20 – 120 |
| OLED Module Thickness | 4 mm | 1 – 10 |
| OLED Mounting Hole Dia | 2.5 mm | 1 – 6 |
| LED Body Dia | 5 mm | 2 – 10 |
| LED Body Height | 6 mm | 2 – 12 |
| Buzzer Dia | 16 mm | 8 – 40 |
| Buzzer Height | 8 mm | 3 – 20 |
| RESET Button Dia | 6 mm | 3 – 15 |
| RESET Button Height | 8 mm | 3 – 20 |
| E-Stop Button Dia | 22 mm | 15 – 50 |
| E-Stop Button Height | 18 mm | 8 – 40 |
| Left Bracket Width | 60 mm | 20 – 120 |
| Left Bracket Height | 40 mm | 20 – 100 |
| Left Bracket Thickness | 2 mm | 1 – 6 |
| Bottom Strip Width | 220 mm | 100 – 250 |
| Bottom Strip Height | 15 mm | 5 – 40 |
| Bottom Strip Thickness | 2 mm | 1 – 6 |
| Right Bracket Width | 50 mm | 20 – 100 |
| Right Bracket Height | 40 mm | 20 – 100 |
| Right Bracket Thickness | 2 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu