Everything else
Hybrid Galaxy S23 Ultra Case
- Bounding box
- 92.9 × 178.2 × 14.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Erstelle eine mehrteilige Handyhülle für das Samsung Galaxy S23 Ultra. Diese Hibridhülle vereint einen harten oberen Rahmen, der auf das display gesteckt wird und es schütz und eine umfassende tpu 95a hülle, welche an den ecken schmale hohlräume als bubble lässt, um stösse auf die ecken abzumildern. Exakte Aussparung für das Kameramodul. Unten eine Öffnung für USB-C, freie Bereiche für Lautsprecher und Mikrofone, kein zusätzlicher S-Pen-Halter, nur freie Entnahme des integrierten Stifts. Bitte vor dem Drucken alle Maße und Toleranzen am echten Handy prüfen.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone length | 163.4 mm | 100 – 180 |
| Phone width | 78.1 mm | 50 – 100 |
| Phone thickness | 8.9 mm | 5 – 15 |
| Wall thickness | 1.2 mm | 1 – 4 |
| Clearance per side | 0.3 mm | 0.1 – 1 |
| Front lip height | 0.8 mm | 0.4 – 3 |
| Lip inward grip | 0.9 mm | 0.3 – 2 |
| Outer corner radius | 12 mm | 4 – 25 |
| Cut-out width | 38 mm | 10 – 70 |
| Cut-out height | 20 mm | 8 – 40 |
| Cut-out corner radius | 5 mm | 1 – 12 |
| Gap from outer top edge | 14 mm | 3 – 40 |
| USB-C slot width | 11 mm | 6 – 20 |
| USB-C slot height | 3.6 mm | 2 – 8 |
| Speaker / mic hole dia | 1.4 mm | 1 – 3 |
| Speaker hole count | 5 mm | 2 – 8 |
| S-Pen slot width | 7 mm | 4 – 12 |
| S-Pen slot centre X | -24 mm | -35 – 0 |
| Emboss height | 0.8 mm | 0.4 – 2 |
| Skull width | 14 mm | 8 – 30 |
| Skull centre Y | 2 mm | -40 – 40 |
| Initials size | 6 mm | 2 – 12 |
| Initials centre Y | -17 mm | -60 – 0 |
| Frame wall thickness | 1.5 mm | 1 – 4 |
| Frame lip height | 3.2 mm | 1.5 – 8 |
| Frame skirt overlap height | 4 mm | 1.5 – 6 |
| Frame clearance over TPU | 0.1 mm | 0 – 0.5 |
| Inward screen lip | 1.2 mm | 0.6 – 3 |
| Corner bubble diameter | 2.8 mm | 1.2 – 6 |
| TPU skin around bubble | 1.4 mm | 1.2 – 3 |
| Corner bubble height | 8 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
