HW-483 Push Button Switch Module

3 views

Bounding box: 20.0 × 15.0 × 10.8 mm
Engine: Precision B-rep
Parameters: 27
Published: September 15, 2026

Download

Free to download and use. See the terms.

The prompt

HW-483 push button switch module

Parameters

Name	Value	Range
PCB Length (X)	20 mm	10 – 60
PCB Width (Y)	15 mm	10 – 60
PCB Thickness	1.6 mm	0.8 – 3
Mounting Hole Dia	2 mm	1 – 4
Hole Inset From Corner	2 mm	1 – 4
Solder Pad Size	1.6 mm	0.8 – 3
Pad Height Above Board	0.15 mm	0.05 – 0.5
Button Body Size (X=Y)	6 mm	3.5 – 12
Button Body Height	3.5 mm	1.5 – 10
Actuator Dia	3.5 mm	1.5 – 5.5
Actuator Height	1.5 mm	0.5 – 5
Terminal Leg Section	0.5 mm	0.2 – 1.2
Terminal Offset From Center	2.5 mm	1 – 3
Pin Count	3 pcs	2 – 8
Pin Pitch	2.54 mm	1.27 – 5.08
Pin Cross Section	0.64 mm	0.3 – 1.2
Header Body Height	2.5 mm	1 – 8
Pin Length Below Board	6 mm	2 – 12
Resistor Body Dia	2.3 mm	1 – 6
Resistor Body Length	6.3 mm	3 – 20
Lead Dia	0.5 mm	0.2 – 1.2
Lead Extension Length	2.5 mm	0.5 – 8
Button X Position	0 mm	-20 – 20
Button Y Position	-3 mm	-20 – 20
Header X Position	-8.6 mm	-30 – 30
Resistor X Position	5 mm	-30 – 30
Resistor Y Position	0 mm	-20 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS