Everything else
Husqvarna WR125 Insugsmuff (Airbox-Carb Boot)
- Bounding box
- 77.0 × 72.0 × 85.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
jag vill bygga en 3d skiss som jag sen kan skriva ut i en 3d printer det är insugsmuffen på en husqvarna wr 125 1995 insugsmuffen är den gummi bit som sitter mellan luftburken och förgasaren
Parameters
| Name | Value | Range |
|---|---|---|
| Airbox-side inner diameter | 52 mm | 25 – 110 |
| Carb-side inner diameter | 42 mm | 20 – 90 |
| Wall thickness | 4 mm | 2 – 10 |
| Overall length | 85 mm | 40 – 200 |
| Axis offset (airbox to carb) | 10 mm | 0 – 40 |
| End flange thickness | 5 mm | 2 – 12 |
| End flange radial overhang | 6 mm | 0 – 15 |
| Clamp bead height | 2.5 mm | 0.5 – 6 |
| Clamp bead width | 7 mm | 2 – 20 |
| Bead inset from end face | 14 mm | 3 – 60 |
| Bore lead-in chamfer | 2 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm