Everything else
Humanoid Robot Torso Shell (1750 mm class)
- Bounding box
- 560 × 220 × 550 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
绘制人形机器人躯干外壳实体,总机器人身高1750mm,躯干范围:胯上端面到肩关节顶面,躯干高度550mm。 肩宽(左右肩关节中心距)560mm,躯干前后厚度220mm。 左右肩关节安装法兰:ISO9409-1-50-4-M6,法兰面朝外侧,法兰面与躯干侧面齐平,法兰中心高度距离胯面490mm。 躯干顶部中心预留颈部安装法兰,PCD40mm,4×M5通孔,颈法兰中心距离胯面550mm。 躯干底部是腰关节输出法兰,自定义PCD80mm,6×M6安装孔,中心走线孔Φ20。 外壳壁厚4mm,整体外轮廓平滑过渡,边角R8,内部掏空,预留走线空腔,无多余装饰曲面,实体模型,单位mm,输出STEP文件。
Parameters
| Name | Value | Range |
|---|---|---|
| Hip face to shoulder top height | 550 mm | 300 – 800 |
| Shoulder joint centre distance | 560 mm | 200 – 900 |
| Front-back thickness | 220 mm | 100 – 400 |
| Width at the hip face | 330 mm | 100 – 600 |
| Depth at the hip face | 180 mm | 80 – 400 |
| Wall thickness | 4 mm | 1.2 – 8 |
| Outer corner radius | 8 mm | 2 – 30 |
| Bottom flange plate thickness | 14 mm | 6 – 40 |
| Top plate thickness | 15 mm | 6 – 40 |
| Flange centre height above hip face | 490 mm | 50 – 790 |
| Flange boss diameter | 80 mm | 40 – 140 |
| Boss depth into the shell | 30 mm | 8 – 60 |
| Bolt circle diameter | 63 mm | 20 – 120 |
| M6 tapping hole diameter | 5 mm | 3 – 10 |
| Tapping hole depth | 22 mm | 5 – 55 |
| ISO9409 centring recess diameter | 50 mm | 20 – 100 |
| Centring recess depth | 2 mm | 0.5 – 6 |
| Bolt circle diameter | 40 mm | 20 – 120 |
| M5 clearance hole diameter | 5.5 mm | 3 – 10 |
| Neck boss diameter | 64 mm | 30 – 120 |
| Neck boss depth below top face | 30 mm | 8 – 80 |
| Bolt circle diameter | 80 mm | 30 – 200 |
| M6 tapping hole diameter | 5 mm | 3 – 10 |
| Tapping hole depth | 10 mm | 3 – 40 |
| Central wiring hole diameter | 20 mm | 6 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
